User Manual

Digital Video Recorder User Manual version 1.0

Fig 4-33 add user-authority

Step2: In the authority interface, assign the definite operation right for that user.

Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address.

Step4: select the user that user wants to delete in the user list box, then click Delete button to delete this user.

Step5: click Change password button to modify the password; click Exit button to exit the current interface.

4.8 P.T.Z configuration

P.T.Z configuration includes two submenus: serial port and advance

① Serial port

Step1: enter into system configurationP.T.Z configurationserial port; refer to Fig 4-34:

Fig 4-34 P.T.Z configuration-serial port

Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the speed dome.

Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.

Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

Definitions and descriptions of network stream:

②

Advance

Step1: enter into system configuration P.T.Z configurationadvance; refer to Fig 4-35:

Parameter Meaning

Address The address of the PTZ device

Baud rate

Baud rate of the PTZ device. Range form: 110、300、600、1200、2400、4800、9600、

19200、34800、57600、115200、230400、460800、21600.

Protocol

Communication protocol of the PTZ device. Range from: NULL、PELCOP、PELCOD 、

LILIN、MINKING、NEON、STAR、VIDO、DSCP、VISCA、SAMSUNG、RM110、HY