DVR User Manual For LTD2504HE, LTD2508HE and LTD2516HE Version 1.
Digital Video Recorder User Manual version 1.0 CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual version 1.0 Table of Contents 1 Introduction ........................................................................................................................................................................ 5 1.1 DVR Introduction ...........................................................................................................................................................................................................5 1.2 Main Features ..............
Digital Video Recorder User Manual version 1.0 4.9.3 Black/White list ..................................................................................................................................................................................................26 5 Record search & playback and backup ......................................................................................................................... 27 5.1 Time search ..............................................................
Digital Video Recorder User Manual version 1.0 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual • • • • • • version 1.
Digital Video Recorder User Manual Type Item Work state indicator 1 Name Description Power HDD Net Backup Play REC Power indicator, when connection , the light is blue When HDD is writing and reading , the light is blue When access to network , the light is blue When backup files and data, the light is blue When playing video, the light is blue When recording, the light is blue 1. Enter menu in live 2. Increase the value in setup 1. Decrease the value in setup 2. Enter backup mode in live 1.
Digital Video Recorder User Manual Item 1 2 3 4 5 6 7 8 9 10 11 12 Name P/Z K/B ALARM IN HDMI port NET VGA port Video out Video in Audio in POWER SWITCH + 5V and GND ALARM OUT 13 USB port 14 Spot out 15 16 17 Audio out POWER INPUT FAN version 1.0 Fig 2.
Digital Video Recorder User Manual version 1.0 If it still doesn't work, Please change a new remote controller to try, or contact your dealers The interface of remote controller is shown in Fig2.8 Remote Controller. Fig 2.
Digital Video Recorder User Manual version 1.0 and drag to set schedule time. In playback: Click left button to choose the options. Click right button to return to live mode. In backup: Click left button to choose the options. Click right button to return to previous picture. In PTZ control: Click left button to choose the buttons to control the PTZ. Click right button to return to live. Notice: Mouse is the default tool in all the operation below unless Exceptional indication.
Digital Video Recorder User Manual 3 version 1.0 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.
Digital Video Recorder User Manual version 1.0 Fig 3-3 live playback 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Fig 4-1 main menu toolbar Click the icon beside the screen display mode, a channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off 8 channels form 1-ch to 16-ch at random to display the live pictures.
Digital Video Recorder User Manual version 1.0 Fig 4-3 basic configuration-basic Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and language. The definitions for every parameters display as below: Device name: the name of the device. It may display on the client end or CMS that help user to recognize the device remotely. Video format: two modes: PAL and NTSC. User can select the video format according to that of camera.
Digital Video Recorder User Manual version 1.0 Fig 4-5 basic configuration-DST 4.2 Live configuration Live configuration includes four submenus: live, host monitor, SPOT and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast. Step1: enter into system configuration live configuration live; refer to Fig 4-6: Fig 4-6 live configuration live Note: Click Camera Name, a soft keyboard will pop up. User can self-define the camera name.
Digital Video Recorder User Manual version 1.0 4.2.3 SPOT Step1: enter into system configuration live configuration SPOT; refer to Fig 4-9: Fig 4-9 live configuration-SPOT Step2: select split mode: 1×1and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step4: selected the split mode, then setup current picture group.
Digital Video Recorder User Manual version 1.0 Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Definitions and descriptions of Record: Parameter Record Audio Meaning Record switch of every channels Enable live record audio 4.3.
Digital Video Recorder User Manual version 1.0 Fig 4-13 record configuration-time Pre-alarm record time: the record time before event happen i.e. record time before motion detection or sensor alarm is triggered. Post-alarm record: set the post recording time after the alarm is finished, five options: 10s、15s、20s、30s and 60s. Expire time: the hold time of saved records. If the set date is overdue, the record files will be deleted automatically.
Digital Video Recorder User Manual version 1.0 Fig 4-15 schedule configuration-schedule Step2: select channel, double-click and a dialog box will pop-up as Fig 4-16, user can edit week schedule: Fig 4-16 schedule-week schedule Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule; Copy: user can copy the specify schedule to other dates. Click “OK” button to save the setting, click “Exit” button to exit current interface.
Digital Video Recorder User Manual version 1.0 Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual version 1.0 Fig 4-23 alarm configuration-motion Step2: enable motion alarm, set alarm hold time which means time interval between two adjacent detective motions. If there is other motion detected during the interval period which is considered continuous movement; otherwise, it will be considered that those two adjacent detective motions are two different motion events.
Digital Video Recorder User Manual version 1.0 4.5.4 Other alarm Step1: enter into system configuration other alarm; refer to Fig 4-27: Fig4-27 other alarm Step2: select a hard disk in the pull down list box, when the disk capacity is lower than that value, there will appear some text information on the lower right of the live image. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.5.
Digital Video Recorder User Manual 1. version 1.0 Domain name Registration (Take www.dyndns.com for example) Note: Users can self-define the hostname, username and password. Input www.dyndns.com in the IE address bar, user can access the domain name registration interface. Click “Sign up Free” and then select the picture, click “Sign up” to register. For example: Hostname is “abc.dyndns.tv.
Digital Video Recorder User Manual version 1.0 Fig 4-30 network configuration-sub stream Step2: select fps, resolution, quality, encode and max bit rate Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual version 1.0 Fig 4-33 add user-authority Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box, then click Delete button to delete this user. Step5: click Change password button to modify the password; click Exit button to exit the current interface. 4.
Digital Video Recorder User Manual version 1.0 Fig 4-35 P.T.Z configuration-advance Step2: in the Advance interface, click preset “Setting” button, a dialog box will pop-up as Fig 4-36: Fig 4-36 advance-preset setting a. in the preset set interface, click Setting button, a dialog will pop-up as Fig 3-37: Fig 4-37 preset set-setting b.
Digital Video Recorder User Manual version 1.0 Fig 4-39 cruise set-modify cruise line b. click Add icon to set the speed and time of preset point; select a preset point, click Delete icon to modify the setting of a preset point. User can click to delete that preset point; click Modify icon those icons to adjust the position of preset point. Click Preview button to preview the cruise line, click OK button to save the setting, click Exit button to exit current interface. c.
Digital Video Recorder User Manual 5 version 1.0 Record search & playback and backup Search configuration includes three submenus: time search, event search and file management. 5.
Digital Video Recorder User Manual version 1.0 Fig 5-3 Search configuration-file management Step2: click Search button, the searched files will be displayed in the file list box; user can select date, channels accordingly. Lock: checked a file, click Lock button to lock this file, after that, that file will not be deleted or covered. Unlock: checked a locked file, click Lock button to unlock this file Delete: checked an unlocked file, click Delete button to delete this file.
Digital Video Recorder User Manual version 1.0 6.1.4 Network information In this interface, user can check relevant parameters of network. 6.1.5 Online information In this interface, user can check the details of the current connection of online users; refer to Fig 6-5: Refresh: refresh the current interface. Disconnect: the administrator authorized to disconnect the client terminal, that PC will not be able to access the device within five minutes. 6.
Digital Video Recorder User Manual 7 version 1.0 Remote Surveillance 7.1 Accessing DVR If making remote view, the DVR must connect with LAN or internet. Then enable network server in the unit. Please refer to 4.6 Network Configuration. This unit supports IE browser, not any client software installed. In addition, it supports XP and Vista. 7.1.1 On LAN Step1: Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router.
Digital Video Recorder User Manual version 1.0 7.2 The remote live preview interface as below: Fig 7-2 Remote live preview interface Symbol and function Definitions: Note: click ① Channel indicator ② Screen display mode ③ Volume ④ Snapping picture ⑤ Start record ⑥ Playback ⑦ Master/sub stream status ⑧ Color adjustment ⑨ PTZ control button to record manual and the record file will be saved in user’s PC.
Digital Video Recorder User Manual version 1.0 Fig 7-5 Multi-picture snap 3. Click “Browse” to set saving path; Click “Save” to save pictures to HDD on the computer; click Exit button to exit current interface. Color adjustment: Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to original value.
Digital Video Recorder User Manual version 1.0 Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS(PAL)/30 FPS(NTSC)for every channel, but it needs higher network bandwidth simultaneously; second stream has low frame rate, max 6FPS (PAL)/7FPS(NTSC) for every channel, it requires low network bandwidth. Therefore, users can select the stream according to their bandwidth. All to master/sub stream: set all channel to master stream or sub stream.
Digital Video Recorder User Manual version 1.0 Step4: Select certain item from the data information list box, click “play” button to playback Step5: Click the relevant buttons in the interface; user can do some operations such as: FF, pause, change channel mode, research, etc.
Digital Video Recorder User Manual version 1.0 Fig 7-11 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock” button to unlock this file Delete: select an unlock file, click “delete” button to delete this file from file list 7.3.
Digital Video Recorder User Manual version 1.0 Fig 7-13 remote menu setup The sub menu lists and the options in every item are similar with those on the DVR. Please refer to Chapter 3 Main Menu Setup Guide for more details. Click “save” button to save above settings; click “default” button will recover the original settings.
Digital Video Recorder User Manual 8 version 1.0 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
Digital Video Recorder User Manual version 1.0 Step6:Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit. Step1:Firstly enable the network access on mobile phone. Then run Web browser. Step2:Input the DVR server’s IP address in a new-built bookmark.
Digital Video Recorder User Manual version 1.0 Step7:Click System setting--->Login Setting to enter login interface. Step8:Input the server’s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9:Enter Live View, it will connect the server and display pictures. Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456.
Digital Video Recorder User Manual version 1.0 Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. o 2. Install through PC.
Digital Video Recorder User Manual version 1.0 Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button Operation Instruction for iphone clients 1. Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server” to save the setting; click 2. button can quick input saved server address, user name and password.
【Playback】 【Log】 【Live】 live view 【 【Information】 【Logoff】 3.
Digital Video Recorder User Manual version 1.0 Group H-Reserve 4.
Digital Video Recorder User Manual version 1.0 5. Record Playback interface Click the record file to playback. 6.
Digital Video Recorder User Manual version 1.0 7.
8. Information View Interface 8.
Digital Video Recorder User Manual version 1.0 Step 3: press “Install” button Step 4: click “OK” button Step 5: user can view the download and install process in notifications; finished download, the software will install automatically.
Digital Video Recorder User Manual version 1.0 Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual version 1.
Digital Video Recorder User Manual version 1.
Digital Video Recorder User Manual version 1.
Digital Video Recorder User Manual version 1.0 Config interface Alarm setting Tick off Sound Alarm,when when Video Loss/Sensor/Motion happen, happen trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen, ,trigger vibrate alarm Storage setting User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Path Save path for mobile video files, the default catalog is /SDCard/.
Digital Video Recorder User Manual version 1.0 8.5 Installation and operation Methods for BlackBerry Mobile phone Client 8.5.1 Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically.
Digital Video Recorder User Manual version 1.0 Note: ote: If the software fails to download, please check in ac accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. 1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure.
Digital Video Recorder User Manual version 1.0 2) Enter into Menu->Option->Cache >Cache Operations, clear up browser cache. Note:When When user used the SuperCam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance >Advance options options->Applications->SuperCam >SuperCam and click “Disable Compatibility” button. This problem will be solved. 8.5.2 Operation peration method for Blackberry mobile phone client 1.
Digital Video Recorder User Manual version 1.0 Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click 2. Main interface Playback Log Information playback record file log record device information view 3. button can quick input saved server address, user name and password.
Digital Video Recorder User Manual version 1.
Digital Video Recorder User Manual version 1.0 Mark 1 Current viewing channel 4.
Digital Video Recorder User Manual version 1.0 5. Software configuration 6.
Digital Video Recorder User Manual version 1.0 Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual version 1.0 Q4. Why are no images displayed on parts or all of the channels of the DVR? a. Connection problem. Please check the cable and the ports of camera and DVR. b. Camera problem. Please check the cameras. c. The video format of the DVR is different from that of the cameras. Please change DVR system format. Q5. Cannot find HDD a. The power of the adapter is not enough. Please change an adapter to try. b. Connection problem. Please check the power and data cables. c.
Digital Video Recorder User Manual version 1.0 a. IE browser blocks ActiveX. Please do setup following below. ① Open IE browser. Click Tools-----Internet OptionsQ. ② select Security------Custom Level….Refer to Fig 8-1 ③ Enable all the sub options under “ActiveX controls and plug-ins” refer to Fig 8-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus block ActiveX. Please uninstall or close them.
Digital Video Recorder User Manual version 1.0 Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait=”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual version 1.0 Q10: How to input password and digital numbers The method to input password and digital numbers is to click the box behind password or items needing to input by numbers, and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller.
Digital Video Recorder User Manual version 1.0 DirectX 9.0 Q13: What are the PC configurations for 16-ch real time product with fully open channel mainstream? PC Module Parameters CPU Intel Core(TM)2 Duo CPU E4600 Motherboard G31/P31 chip HDD 80G RAM 1GB VGA GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 OS Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA DirectX 9.
Digital Video Recorder User Manual version 1.0 b. Right click IE browser (refer to Fig 14-2), select Run as administrator to run browser.
Digital Video Recorder User Manual version 1.0 Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings. Video Format Resolution PAL NTSC D1 D1 Frame Rate Totally(FPS) 25 30 Video Quality Bit Rate (kbps) Used Space(MB/h) Highest 2M 915 Higher 1.
Digital Video Recorder User Manual version 1.0 Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity SSK 512MB, 1G, 2GB Netac 4GB Kingston 2GB Aigo 2GB Smatter vider 1GB SanDisk 4GB Tab C.1 Compatible USB drive 2. Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON DH—20A6S01C LITEON DH-20A4P02C SAMSUNG TS-H653B Tab C.
Digital Video Recorder User Manual version 1.0 Appendix D 4-CH Specifications Compression format Standard H.264 Baseline Video output Composite:1.0V p-p/75Ω BNC×2 , VGAX1 Video input Composite:1.
Digital Video Recorder User Manual version 1.
Digital Video Recorder User Manual version 1.0 Appendix E 8-CH Specifications Compression format Standard H.264 Baseline Video output Composite:1.0V p-p/75Ω BNC×2 , VGAX1 Video input Composite:1.
Digital Video Recorder User Manual version 1.
Digital Video Recorder User Manual version 1.0 Appendix F 16-CH Specifications Compression format Video output Standard H.264 Baseline Video Input VGA Resolution Composite:1.