Manual

20
Digital Video Recorder User Manual
Step1: enter into system configurationlive
configurationmain monitor; refer to Fig 4-8:
Step2: select split mode: 1×1、2×2、2×3、3×3、4×4 and
channel
Step3: dwell time: the time interval for a certain dwell picture
display switching to next dwell picture display
Step4: selected the split mode, then setup current picture
group. Click button to setup the previous channel
groups of dwell picture.
Fig 4-8 live configuration-host monitor
Click button to set the latter channel groups of dwell picture.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.2.3 Spot
Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9:
Step2: select split mode: 1×1and channel
Step3: dwell time: the time interval for a certain dwell picture
display switching to next dwell picture display
Step4: select the split mode and then setup current picture
group. Click button to setup the previous channel
groups of dwell picture. Click button to set the latter
channel groups of dwell picture.
Step5: click “apply” button to save the setting; click “exit”
button to exit current interface
Fig 4-9 live configuration-Spot