Owner's manual

18
Digital Video Recorder User Manual
Step3: in this interface, user can adjust brightness, hue,
saturation and contrast in live; click “default” button to
resort default setting, click “OK” button to save the
setting.
Step4: user can setup all channels with same parameters,
tick off “all”, then do relevant setup.
Fig 4-7 live-color adjustment
4.2.2 Main monitor
Step1: enter into system configurationlive configurationmain monitor; refer to Fig 4-8:
Step2: select split mode: 1×1、2×2、2×3、3×3、4×4 and channel.
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picture display
Step4: selected the split mode, then setup current picture
group. Click
button to setup the previous channel
groups of dwell picture, click
button to set the latter
channel groups of dwell picture.
Fig 4-8 live configuration-host monitor