Owner's manual

ManualsBrandsLT Security ManualsVideo surveillance systemsLTD2316SE-SL

DVR User Manual

For H.264 16-channel digital video recorder

Summary of content (99 pages)

PAGE 1
DVR User Manual For H.
PAGE 2
Digital Video Recorder User Manual CAUTION  Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice  This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
PAGE 3
Digital Video Recorder User Manual Table of Contents 1 Introduction ................................................................................................................................................... 1 1.1 DVR Introduction ..................................................................................................................................................................... 1 1.2 Main Features.......................................................................................
PAGE 4
Digital Video Recorder User Manual 4.2.2 Main monitor ....................................................................................................................................................................................................... 18 4.2.3 Spot..................................................................................................................................................................................................................... 19 4.2.4 Mask .................
PAGE 5
Digital Video Recorder User Manual 4.8 P.T.Z configuration ................................................................................................................................................................. 38 4.9 Reset ..................................................................................................................................................................................... 41 5 Record search & playback and backup ......................................................
PAGE 6
Digital Video Recorder User Manual 7.4 Remote System configuration ............................................................................................................................................... 61 7.5 Remote Management ............................................................................................................................................................ 62 Remote Information Search ..........................................................................................
PAGE 7
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
PAGE 8
Digital Video Recorder User Manual RECORD & PLAYBACK • Record modes: Manual, Schedule, Motion detection and Sensor alarm recording • Support recycle after HDD full • Resolution, frame rate and picture quality are adjustable • 128MB for every video file packaging • 2 audio channels available • Three record search mode: time search, event search and image search.
PAGE 9
Digital Video Recorder User Manual • • Support 1 administrator and, 63 users. Support event log recording and checking, events unlimited NETWORK • Support TCP/IP, DHCP, PPPoE, DDNS protocol • Support IE browser to do remote view • Support setup client connection amount • Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
PAGE 10
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out. 2.1 Install Hard Drive Notice: 1. This series support one SATA hard drive. Please use the hard drive the manufacturers recommend specially for security and safe field. Please refer to “Appendix C Compatible Devices 3”. 2. Please calculate HDD capacity according to the recording setting.
PAGE 11
Digital Video Recorder User Manual 2.2 Front Panel Description Notice: The front panel descriptions are only for reference; please make the object as the standard.
PAGE 12
Digital Video Recorder User Manual 2.3 Rear Panel Instruction The rear Panel interface for 16-ch is shown as Fig 2.3: Fig 2.3 Rear Panel for 16-ch Item Name Description 1 2 3 4 5 6 7 8 9 Audio out Audio in VGA port Video out P/Z K/B Alarm out + 5V and GND ALARM IN 10 USB port Audio output, connect to the sound box 2 CH Audio input VGA output, connect to monitor Connect to monitor Connect to speed dome Connect to keyboard 1-ch relay output.
PAGE 13
Digital Video Recorder User Manual Item Name 11 NET 12 Spot out 13 14 Video in Power input Description Network port Connect to monitor as an AUX output channel by channel. Only video display, no menu show Video input channels from 1-16 DC12V 2.4 Remote Controller It uses two AAA size batteries and works after loading batteries as following: Step1: Open the battery cover of the Remote Controller. Step2: Place batteries. Please take care the polarity (+ and -). Step3: Replace the battery cover.
PAGE 14
Digital Video Recorder User Manual Fig 2.4 Remote Controller Item Name Function 1 Power Button 2 INFOR Button 3 4 5 6 7 8 9 10 11 12 REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Soft switch off to stop firmware running. Do it before power off.
PAGE 15
Digital Video Recorder User Manual Item Name 13 14 Auto Dwell Button BACKUP Button 15 PTZ Control Button Function To enter auto dwell mode To enter backup mode To control PTZ camera: Move camera/ZOOM/FOCUS/IRIS/SPEED control Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0. It’s not necessary to reset the device ID when a remote is to be used to control a single DVR.
PAGE 16
Digital Video Recorder User Manual 2.5.2 Use Mouse In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display. Click right button to show the control bar at the bottom of the screen. Here are all control and setup. Click right mouse again to hide the control bar. In setup: Click left button to enter. Click right button to cancel setup, or return to the previous. If want to input the value, move cursor to the blank and click.
PAGE 17
Digital Video Recorder User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power on Step1: connect with the source power; switch on the power button near the power port on the rear panel. Step2: the device will be loaded, and the power indicator will display blue.
PAGE 18
Digital Video Recorder User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456. The concrete operation steps for change password, add or delete user please refer to User management configuration for more details. 3.
PAGE 19
Digital Video Recorder User Manual 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. User can do concrete operation by click the buttons on screen.
PAGE 20
Digital Video Recorder User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Fig 4-1 main menu toolbar Click the icon beside the screen display mode, a channel select dialog will appear. Dwell: Range of selecting to dwell is from single picture preview mode to 1/4/6/9/16 picture preview mode. Color: Click this button; user can adjust the color of live pictures.
PAGE 21
Digital Video Recorder User Manual icon will pop-up the configuration menu: Fig 4-2 system setup 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.1 System Step1: enter into system configurationbasic configurationsystem; refer to Fig 4-3: Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and language.
PAGE 22
Digital Video Recorder User Manual relevant right in system configuration. Show time: display time in live. Show wizard: tick off this item, there will display an opening wizard with time zone and time setup information. Max network uses: set the max user amount of network connection. VGA resolution: the resolution of live display interface, range from: VGA800*600、VGA1024*768、VGA1280*1024and CVBS Note：When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor.
PAGE 23
Digital Video Recorder User Manual 4.1.3 DST Step1: enter into system configurationbasic configurationDST; refer to Fig 4-5: Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Fig 4-5 basic configuration-DST 4.2 Live configuration Live configuration includes four submenus: live, main monitor, Spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast.
PAGE 24
Digital Video Recorder User Manual Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default setting, click “OK” button to save the setting. Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup. Fig 4-7 live-color adjustment 4.2.
PAGE 25
Digital Video Recorder User Manual 4.2.3 Spot Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9: Step2: select split mode: 1×1and channel. Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display. Step4: selected the split mode, then setup current picture group. Click button to setup the previous channel groups of dwell picture, click channel groups of dwell picture.
PAGE 26
Digital Video Recorder User Manual Setup mask area live image mask area 4.3 Record configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11: Step2: tick off record, audio and record time. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
PAGE 27
Digital Video Recorder User Manual 4.3.2 Record stream Step1: enter into system configurationrecord configurationrecord bit rate; refer to Fig 4-12: Step2: setup fps, resolution and quality Step3: user can setup all channels with same parameters. Tick off “All” to do relevant setup. Note: if the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.
PAGE 28
Digital Video Recorder User Manual Fig 4-13 record configuration-time 4.3.4 Stamp Stamp：User can overlap the channel name and time stamp on video. Step1: enter into system configuration record configuration stamp; refer to Fig 4-14: Step2: tick off camera name, time stamp; click Set button, user can use cursor to drag the camera name and time stamp in random positions, refer to below Figures: Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
PAGE 29
Digital Video Recorder User Manual Before drag after drag 4.3.5 Recycle record Step1: enter into system configurationrecord configurationrecycle record; Step2: tick off recycle record, the recycle record function will enable, it will cover the earlier recorded files and keep recoding when HDD is full; if disenable this function, it will stop recording when HDD is full.
PAGE 30
Digital Video Recorder User Manual Fig 4-15 schedule configuration-schedule Step2: select channel, double-click and a dialog box will pop-up as Fig 4-16, user can edit week schedule: ① ② Fig 4-16 schedule-week schedule Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule. Copy: user can copy the specify schedule to other dates. Click “OK” button to save the setting, click “Exit” button to exit current interface.
PAGE 31
Digital Video Recorder User Manual Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.3 Sensor Step1: enter into system configurationschedule configurationalarm; refer to Fig 4-18: Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details.
PAGE 32
Digital Video Recorder User Manual 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. ① Basic Step1: enter into system configurationalarm configurationsensorbasic; refer to Fig 4-19: Step2: enable sensor alarm, set the alarm type according to triggered alarm type. Two option: NO and NC. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
PAGE 33
Digital Video Recorder User Manual Step3: Buzzer: If selected, the local buzzer would be activated on an alarm. Full screen alarm: when triggered alarm, there will pop up full screen alarm. Email: If selected. When an alarm trigged, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels. When an alarm is trigged, the system will automatically save the captured pictures from the selected channel.
PAGE 34
Digital Video Recorder User Manual 4.5.2 Motion Motion includes two sub menus: motion and schedule. ① Motion Step1: enter into system configurationalarm configurationmotion; refer to Fig 4-23: Fig 4-23 alarm configuration-motion Step2: enable motion alarm, set alarm hold time which means time interval between two adjacent detective motions.
PAGE 35
Digital Video Recorder User Manual will be cleared; click following picture）; Click icon, user can test whether the sensitivity value and motion area are suitable accordingly（refer to icon, to save the setting; click icon, exit current interface. Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection area firstly, and then make the operation. Step6: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
PAGE 36
Digital Video Recorder User Manual 4.5.3 Video loss Step1: enter into system configurationalarm configurationvideo loss; refer to Fig 4-26: Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Fig 4-26 alarm configuration-video loss 4.5.
PAGE 37
Digital Video Recorder User Manual Buzzer – If selected the local buzzer would be activated on an alarm. Email: If selected, the DVR will send an email alert to the preconfigured email address. To Alarm Out: If selected would trigger the inbuilt relay on the set event alarm. 4.5.
PAGE 38
Digital Video Recorder User Manual Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address: http://192.168.0.25:82 into IE browser. Server port: communication port. Step3: Tick off the "Obtain an IP address automatically", the device will distribute IP address, subnet mask, and gateway IP and DNS server.
PAGE 39
Digital Video Recorder User Manual Definitions and descriptions of Sub stream: Parameter FPS Resolution Quality Meaning Range from: 1-25 Support CIF The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest 4.6.3 Email Step1: enter into system configurationnetwork configurationemail; refer to Fig 4-31: SMTP Server/Port: the name and port number of SMTP server.
PAGE 40
Digital Video Recorder User Manual 4.6.4 Other settings Step1: enable DDNS server: user needs to input user name, password and host domain name of the registered website and then click TEST to test the effectiveness of the relevant information. Step2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Note: The domain name server that selected by user is a banding domain name of DVR.
PAGE 41
Digital Video Recorder User Manual After user fill in the blank, click “Add to cart”, Dynamic DNS Hosts dialog box will be displayed. Then create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. 2． DVR Setting （1） Domain name According to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”.
PAGE 42
Digital Video Recorder User Manual 3． Application Connect DVR to the Network Client. ① Enter into Basic configurationNetworkother settings, tick off DDNS, select “Dyndns” at the DDNS Sever pull down list box and input user name and password. ② Enter into configuration interface of the router, map the server port and IP address. Click Save button to save the setting ③ Login IE browser and input registered domain name “http://www.abc.dyndns.tv”, connect to DVR client.
PAGE 43
Digital Video Recorder User Manual Fig 4-33 user management configuration Fig 4-34 add-general ② Authority: Step1: enter into Add userauthority; refer to Fig 4-35: Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box, then click Delete button to delete this user.
PAGE 44
Digital Video Recorder User Manual 4.8 P.T.Z configuration P.T.Z configuration includes two submenus: serial port and advance. ① Serial port Step1: enter into system configurationP.T.Z configurationserial port; refer to Fig 4-36: Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the speed dome. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Fig 4-36 P.T.
PAGE 45
Digital Video Recorder User Manual Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting a. in the preset set interface, click Setting button, a dialog will pop-up as Fig 3-39: Fig 4-39 preset set-setting b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome. c. select the serial number of the preset point, set the preset name.
PAGE 46
Digital Video Recorder User Manual Fig 4-40 cruise set a. click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line, click Setup button, a dialog box will pop-up as Fig 4-41: b. click Add icon to set the speed and time of preset point; select a preset point, click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click those icons to adjust the position of preset point.
PAGE 47
Digital Video Recorder User Manual Step4: in the Advance interface, click track “Setting” button, a dialog box will pop-up as Fig 4-42: Fig 4-42 track set a.
PAGE 48
Digital Video Recorder User Manual 5 Record search & playback and backup Search configuration includes four submenus: time search, event search, file management and image. 5.
PAGE 49
Digital Video Recorder User Manual Step3: select a date, press Search button and then click the time grid to set the play start time or input play record time manually. The selected time match the blue grid. Note: the vertical column means hours, horizontal column means channels. Step4: click Play button to playback record; click the relevant buttons on the screen to do operation: Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button.
PAGE 50
Digital Video Recorder User Manual Step2: click Search button to display the searched event information in the event list box. User can select date, channel and then tick off Motion, Sensor or All accordingly. Step3: double check a certain record file to playback. Note: when the monitor resolution is VGA800*600, the event search interface will appear a hide button. Click this button and the whole interface can be expanded. 5.
PAGE 51
Digital Video Recorder User Manual 5.4 Image In this interface, user can set start, end time and channels to search the captured images and save, lock or delete these images. There are at most 2000 images which can be saved in the SATA disk. If there are more images saved in the SATA disks than 2000 images, those additional images will supersede prior images. Double click the image with the left mouse, which will automatically playback from the time of the image captured. 5.
PAGE 52
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to set date. Note: if there are overlapping files, a “+” character will show behind the channel ID. 6.1.
PAGE 53
Digital Video Recorder User Manual 6.2 Disk management Step1: enter into disk management interface. Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting. Step3: select a hard disk and then click Format button to star format.
PAGE 54
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 Accessing DVR If making remote view, the DVR must connect with LAN or internet. Then enable network server in the unit. Please refer to Network Configuration. This unit supports IE browser, not any client software installed. In addition, it supports XP and Vista. 7.1.1 On LAN Step1: Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router.
PAGE 55
Digital Video Recorder User Manual Fig 7-1 View with IE browser Notice: If HTTP port is not 80, other number instead, need add the port number after IP address. For example, set HTTP port as 82, need input IP address like 192.168.0.25:82. User name and password here are the same with that used on the DVR. The default is admin and 123456.
PAGE 56
Digital Video Recorder User Manual 7.1.2 On WAN There are two ways that the DVR is connected to internet. 1. Connect the DVR to internet through a router or virtual server. Step1: Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router. Step2: Enter Video to set network video parameters like resolution, frame rate etc. Step3: Forward IP address and port number in Virtual Server setup of the router or virtual server. Close firewall.
PAGE 57
Digital Video Recorder User Manual 7.
PAGE 58
Digital Video Recorder User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Fig 7-3 Channel select dialog Take 8-channel DVR for example: user can tick off channels form 1-ch to 16-ch at random to display the live pictures, 8 channels can be selected at most. Then click OK button to confirm the setting.
PAGE 59
Digital Video Recorder User Manual PTZ control Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is supported by the device and set the relative parameters manually. User can control the dome up, down, right, left or stop rotating on Control Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left.
PAGE 60
Digital Video Recorder User Manual Click the right mouse on the live interface, a pull-down menu will appear as below: Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FP（NTSC） for every channel, but it needs higher network bandwidth simultaneously; second stream has low frame rate, max 6FPS （PAL） /7FPS（NTSC） for every channel, it requires low network bandwidth.
PAGE 61
Digital Video Recorder User Manual 7.3 Remote playback & backup 7.3.1 Remote playback Click button to enter into record playback interface, refer to Fig 7-5: Select the record date and channels; double-click the file name in the record file list box, user can play that file and preview the picture. Fig 7-5 Play record file interface This DVR supports remote time search, event search and file management.
PAGE 62
Digital Video Recorder User Manual By Time Search: Step1: Enter into Searchtime search; refer to Fig 7-6: Fig 7-6 time search interface Step2: click “Search” button. The record data will be displayed in the data information list box; the highlight date in the area② means have record data, click those data; select the record channels in area③.
PAGE 63
Digital Video Recorder User Manual Step3: User can set the data playing time and display mode in the area① as required. Step4: Select certain item from the data information list box, click “play” button to playback. Step5: Click the relevant buttons in the interface; user can do some operations such as: FF, pause, change channel mode, research, etc.
PAGE 64
Digital Video Recorder User Manual By Event Search: Step1: Enter into Searchevent search; refer to Fig 7-8: Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box, double-click certain item to playback.
PAGE 65
Digital Video Recorder User Manual File Management Step1: Enter into Searchfile management; refer to Fig 7-9: Fig 7-9 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock” button to unlock this file Delete: select an unlock file, click “delete” button to delete this file from file list 59
PAGE 66
Digital Video Recorder User Manual 7.3.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time, then click “search’ button, the file information will be displayed in the file list box Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user’s PC.
PAGE 67
Digital Video Recorder User Manual 7.4 Remote System configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters.
PAGE 68
Digital Video Recorder User Manual 7.5 Remote Management Remote Information Search The system will automatically record the working condition and operation process during the period of work. User can view information, such as username, IP address and so on.
PAGE 69
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，Blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
PAGE 70
Digital Video Recorder User Manual Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: refer below picture in the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit.
PAGE 71
Digital Video Recorder User Manual Step2：Input the DVR server’s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer picture in the left: Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer picture in the right: Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5：A Scam shortcut icon appears on the system menu after finished. Step6：Run Scam program.
PAGE 72
Digital Video Recorder User Manual Step8：Input the server’s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9：Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can do snapshot, change channels and control PTZ.
PAGE 73
Digital Video Recorder User Manual Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL”.
PAGE 74
Digital Video Recorder User Manual Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2. Install through PC.
PAGE 75
Digital Video Recorder User Manual Step 3: Enable “search” function to search “SuperCam” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button 69
PAGE 76
Digital Video Recorder User Manual Operation Instruction for SuperCam (iphone) 1. Login interface Enter server’s IP address (or domain name), user name and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2. Main Interface 【Playback】【Log】 log record 【Live】 live view 【Information】【Logoff】 3.
PAGE 77
Digital Video Recorder User Manual Mark 1 Group H-Reverse Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set t
PAGE 78
Digital Video Recorder User Manual 4. 5. Image view interface, refer below picture in the left: Record Playback interface, refer below picture in the right: Click the record file to playback. 6. Server list Interface, refer to below picture in the left: 7.
PAGE 79
Digital Video Recorder User Manual Main parameters for mobile phone video configuration Record file clip size: Single video size.
PAGE 80
Digital Video Recorder User Manual Step 1: run Google Market program Step 3: press “Install” button Step 2: search”SuperCam” Step 4: click “OK” button Step 5: user can view the download and install process in notifications; finished download, the software will install automatically.
PAGE 81
Digital Video Recorder User Manual Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
PAGE 82
Digital Video Recorder User Manual Main menu 【Playback】 playback record file 【Log】 log record 【Live】 live view 【Information】【Logoff】【Image】 image view 【Server List】 device list software setting 【Settings】【Help】 logoff and return to login interface device information view software help center Live view ( Fig 1）（Fig 2） 76
PAGE 83
Digital Video Recorder User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Group Mark 2 Preset Select the preset point Set the cruise line Image view Previous Next Zoom out Delete Zoom in Return to main
PAGE 84
Digital Video Recorder User Manual Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3）（Fig 4） Click the record file (Fig 3) to playback (Fig 4) Server list 78
PAGE 85
Digital Video Recorder User Manual Config interface Alarm setting Tick off Sound Alarm ， when Video Loss/Sensor/Motion happen，trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm Storage setting Path Reserved disk space Video clip size Information view Remove all recorder files before User can setup the relevant parameters of mobile video. This function can be valid only insert SD card.
PAGE 86
Digital Video Recorder User Manual 8.5 Installation and operation Methods for BlackBerry Mobile phone Client 8.5.1 Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically.
PAGE 87
Digital Video Recorder User Manual Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. (1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure in the left. (2) Enter into Menu->Option->Cache Operations, clear up browser cache.
PAGE 88
Digital Video Recorder User Manual 8.5.2 Operation method for Blackberry mobile phone client 1. Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
PAGE 89
Digital Video Recorder User Manual 3.
PAGE 90
Digital Video Recorder User Manual Note: User can click Mark 1 Return button on the Blackberry phone to return the previous interface. Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Preset 4.
PAGE 91
Digital Video Recorder User Manual 5. Software configuration 6.
PAGE 92
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
PAGE 93
Digital Video Recorder User Manual Q6. Cannot record a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to Record Configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c.
PAGE 94
Digital Video Recorder User Manual ④ Then click ok to finish setup. b. Other plug-ins or anti-virus block ActiveX. Please uninstall or close them. Fig8-1 Fig8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected.
PAGE 95
Digital Video Recorder User Manual Solution: Change another new hard disk or reformat the broken one Q10: How to input password and digital numbers The method to input password and digital numbers is to click the box behind password or items needing to input by numbers, and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller.
PAGE 96
Digital Video Recorder User Manual OS DirectX Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA 9.0 Q13: How to handle the situation when codec Control is blocked to install in the VISTA or Win7 system? If user gets this problem, may have two ways to fix it: a. Enter Control PanelUser Account and Family Safety  User Account Control(refer to below picture); click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b.
PAGE 97
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
PAGE 98
Digital Video Recorder User Manual Appendix C 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Compatible Devices Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB Tab C.1 Compatible USB drive 2. Compatible HDD list Brand Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 ST31000340SV Seagate Pipeline HD.2 Seagate Barracuda 7200.10 Seagate Barracuda 7200.10 ST3250310AS Seagate Barracuda 7200.11 ST3160813AS Seagate Barracuda 7200.
PAGE 99
Digital Video Recorder User Manual Appendix D 16-CH Specifications Compression format Video output H.264 Main Profile Video Input VGA Resolution Record Resolution Composite：1.