Owner manual

DVR User Manual
21
Fig 4-6 live configurationlive Fig 4-7 live-color adjustment
4.2.2 Main monitor
Step1: enter into system configurationlive
configurationmain monitor; refer to Fig 4-8:
Step2: select split mode: 1×1、2×2、2×3、3×3、4×4 and
channel
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picture display
Step4: selected the split mode, then setup current picture
group. Click button to setup the previous channel
groups of dwell picture.
Fig 4-8 live configuration-host monitor
Click button to set the latter channel groups of dwell picture.
Step5: click “default” to resort default setting; click “apply” to save the setting; click “exit” to exit current interface.