DVR User Manual For H.
DVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
DVR User Manual Table of Contents 1 Introduction ......................................................................................................................................................................... 1 1.1 DVR Introduction............................................................................................................................................................... 1 1.2 Main Features .........................................................................................
DVR User Manual 4.2.4 Mask ......................................................................................................................................................................... 22 4.3 Record configuration ....................................................................................................................................................... 23 4.3.1 Enable........................................................................................................................
DVR User Manual 5 Record search & playback and backup ................................................................................................................................. 48 5.1 Time search ..................................................................................................................................................................... 48 5.2 Event search ..........................................................................................................................
DVR User Manual 7.6 Remote Management ...................................................................................................................................................... 73 Mobile Surveillance ........................................................................................................................................................... 74 8.1 By Phones with Windows mobile ...........................................................................................................
DVR User Manual 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
DVR User Manual Support built-in SATA DVD writer to backup Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 128MB for every video file packaging 4 audio channels available Two record search mode: time search and event search Support 4/8/16 screen playback simultan
DVR User Manual SECURITY Customize user right: log search, system setup, two way audio, file management, disk management, remote login, live view, manual record, playback, PTZ control and remote live view Support 1 administrator and 63 users. Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream.
DVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. this series support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting.
DVR User Manual 2. This device is only for backup Step1: Unscrew and Open the top cover Step2: Connect the power and data cables. Place the DVD writer onto the bottom case as Fig2.3. Step3: Screw the DVD writer as Fig2.4 Fig 2.3 Connect the DVD Writer Fig 2.4 Screw the Writer 2.2 Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard.
DVR User Manual Item Type Compound button Name RECORD/FOCUS REW/SPEED SEARCH/ZOOM PLAY /IRIS FF/ P.T.Z. STOP/ESC 1-9 3 Digital button 4 Input button 5 IR receiver USB 6 0/10+ Direction button Multi-screen Enter button IR USB port Description 1. Record manually 2. FOCUS function enables at PTZ mode. 1. Rewind key 2. SPEED function enables at PTZ mode 1. Enter search mode 2.ZOOM function enables at PTZ mode. 1. Enter play interface 2. IRIS function enables at PTZ mode 1. Fast forward 2.
DVR User Manual Fig 2.5 Rear Panel for 4-ch Item 1 Name Video out 2 Spot out 3 4 5 6 7 8 9 Audio out P/Z K/B ALARM IN Video in VGA port LAN 10 USB port 11 12 13 14 + 5V and GND Audio in POWER INPUT FAN Description Connect to monitor Connect to monitor as an AUX output channel by channel.
DVR User Manual The rear Panel interface for 8-ch is shown as Fig 2.6: Item 1 Name Video out 2 Spot out 3 4 5 6 7 8 Audio out Video in POWER INPUT FAN VGA port LAN 9 USB port 10 11 12 P/Z K/B + 5V and GND Fig 2.6 Rear Panel for 8-ch Description Connect to monitor Connect to monitor as an AUX output channel by channel.
DVR User Manual Item Name Description 13 ALARM IN Connect to external sensor1-8 14 Audio in 4 CH Audio input The rear Panel interface for 16-ch is shown as Fig 2.7: Fig 2.
DVR User Manual Item Name 13 ALARM OUT 14 USB port 15 Spot out 16 17 Audio out POWER INPUT Description 1-ch relay output. Connect to external alarm. To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Connect to monitor as an AUX output channel by channel. Only video display, no menu show Audio output, connect to the sound box DC12V 2.
DVR User Manual Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Name Power Button INFOR Button REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button PTZ Control Button Fig 2.8 Remote Controller Function Soft switch off to stop firmware running. Do it before power off.
DVR User Manual Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0.
DVR User Manual In setup: Click left button to enter. Click right button to cancel setup, or return to the previous. If want to input the value, move cursor to the blank and click. An input window will appear as Fig2.9. It supports digitals, letters and symbols input. Fig 2.9 Digital Numbers and Letters Input Window Users can change some value by the wheel, such as time. Move cursor onto the value, and roll the wheel when the value blinks. It supports mouse drag. I.e.
DVR User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power on Step1: connect with the source power; switch on the power button near the power port on the rear panel Step2: the device will be loaded, and the power indicator will display blue Step3 before start, a WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management.
DVR User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456” The concrete operation steps for change password, add or delete user please refer to Fig 4.7 User management configuration for more details. 3.
DVR User Manual 3.3.1 Live playback Click Play screen. button to playback the record. Refer to Figure3-3.
DVR User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Click the Fig 4-1 main menu toolbar icon beside the screen display mode to display a channel select dialog. 6/8/13 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Click icon to set up picture-in-picture.
DVR User Manual User can click button and drag it anywhere with the left mouse Click Menu button to pop up a window as Fig 4-2; user can also press MENU button on the front panel or operate with remote controller to display the main menu. Click Setup icon will pop-up the configuration menu: Fig 4-2 system setup 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.
DVR User Manual Show time: display time in live. Show wizard: tick off this item, there will display an opening wizard with time zone and time setup information Max network uses: set the max user amount of network connection VGA resolution: the resolution of live display interface, range from: VGA800*600、 VGA1024*768、VGA1280*1024and CVBS Note： When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor. Language: setup the menu language.
DVR User Manual 4.1.3 DST Step1: enter into system configurationbasic configurationDST; refer to Fig 4-5: Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Fig 4-5 basic configuration-DST 4.2 Live configuration Live configuration includes four submenus: live, main monitor, spot and mask. 4.2.
DVR User Manual Fig 4-6 live configurationlive Fig 4-7 live-color adjustment 4.2.2 Main monitor Step1: enter into system configurationlive configurationmain monitor; refer to Fig 4-8: Step2: select split mode: 1×1、2×2、2×3、3×3、4×4 and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step4: selected the split mode, then setup current picture group. Click button to setup the previous channel groups of dwell picture.
DVR User Manual 4.2.3 Spot Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9: Step2: select split mode: 1×1and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step4: select the split mode and then setup current picture group. Click button to setup the previous channel groups of dwell picture. Click button to set the latter channel groups of dwell picture.
DVR User Manual Setup mask area Live image mask area 4.3 Record configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.
DVR User Manual Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: select All to setup all channels with same parameters. 4.3.2 Record stream Step1: enter into system configurationrecord configurationrecord bit rate; refer to Fig 4-12: Step2: setup rate, resolution, quality, encode and max bit stream Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup.
DVR User Manual 4.3.3 Time Step1: enter into system configurationrecord configuration time; refer to Fig 4-13: Pre-alarm record time: the record time before event happen i.e. record time before motion detection or sensor alarm is triggered. Post-alarm record: set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s. Expire time: the hold time of saved records. If the set date is overdue, the record files will be deleted automatically.
DVR User Manual Before drag after drag 4.3.5 Recycle record Step1: enter into system configurationrecord configurationrecycle record; Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when HDD is full; if user disenables this function, it will stop recording when HDD is full. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
DVR User Manual Fig 4-15 schedule configuration-schedule Step2: select channel and double-click to pop up a window as Fig 4-16. Now user can edit week schedule: ① Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule; Copy: user can copy the specify schedule to other dates. Click “OK” button to save the setting; click “Exit” button to exit current interface.
DVR User Manual Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.3 Sensor Step1: enter into system configurationschedule configurationalarm; refer to Fig 4-18: Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue.
DVR User Manual 4.5 Alarm configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out. 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. ① Basic Step1: enter into system configurationalarm configurationsensorbasic; refer to Fig 4-19: Step2: enable sensor alarm and then set the alarm type according to triggered alarm type. Two option: NO and NC.
DVR User Manual Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger Step 3: If Buzzer is selected, there will be triggered buzzer alarm out. Full screen alarm: when alarm is triggered, there will pop up full screen alarm; Email: Select this function. When an alarm is triggered, a notification email will be sent to user‟s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels.
DVR User Manual Fig 4-22 sensor-schedule 4.5.2 Motion Motion includes two sub menus: motion and schedule. ① Motion Step1: enter into system configurationalarm configurationmotion; refer to Fig 4-23: Step2: enable motion alarm, set alarm hold time which means time interval between two adjacent detective motions.
DVR User Manual Step4: After clicking Area button, a dialog box will pop-up as Fig 4-24: Fig 4-24 motion-area Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value is the higher sensitivity you get.
DVR User Manual Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. Fig3-25 alarm configuration-schedule 4.5.3 Video loss Step1: enter into system configurationalarm configurationvideo loss; refer to Fig 4-26: Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step3: user can also setup all channels with same parameters.
DVR User Manual 4.5.4 Other alarm This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event, Disk Attenuation or Disk Lost. Step1: enter into system configurationother alarm; refer to Fig 4-27: Step 2: Use the dropdown menu and select the event or the alarm. Step 3: Check the required trigger options. If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage Alarm” to choose a threshold value for remaining HDD space.
DVR User Manual 4.6 Network configuration Network configuration includes five submenus: network, sub stream, Email, server and other settings. 4.6.1 Network Step 1: enter into system configurationnetwork configurationnetwork; refer to Fig4-29: Step 2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address: http://192.168.0.
DVR User Manual Fig 4-30 network configuration-sub stream Definitions and descriptions of Sub stream: Parameter FPS Resolution Quality Encode Max bit rate Meaning Range from: 1-25 Support CIF The quality of the clients‟ image. The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、2 Mbps 4.6.
DVR User Manual SMTP Server/Port: the name and port number of SMTP server. After selecting “This server requires a secure connection (SSL)”, user can setup mail servers (such as Gmail) according to actual needs. Send address/password: sender‟s email address/password Receive address: receiver‟s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: After selecting it, the system will attach images when sending the emails.
DVR User Manual 4.6.5 Other settings Step 1: enable DDNS server: user needs to input user name, password and host domain name of the registered website, click TEST to test the effectiveness of the relevant information. Step 2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Note: The domain name server that selected by user is a banding domain name of DVR.
DVR User Manual If “Show icons for networked UPnP devices” can‟t display in the “Network Tasks” list box, please follow the below operation: Click “Tools”-- “Folder options” Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1． Domain name Registration （Take www.dyndns.com for example） Note: Users can self-define the hostname, username and password. Input www.dyndns.
DVR User Manual After user fill in the blank, click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Next, create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account.
DVR User Manual According to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client. ① Enter into Main menuNetworkother settings, tick off DDNS, select “Dyndns” at the DDNS Sever pull down list box and input user name and password.
DVR User Manual 4.7 User management configuration Step 1: enter into system configurationuser management configuration; refer to Fig 4-34: Step 2: click Add button to display a dialog box as Fig 4-35: Fig 4-34 user management configuration Fig 4-35 add-general ① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK button. Then this user will be added into the user list box; click Exit button to exit the current interface.
DVR User Manual Fig 4-36 add user-authority 4.8 P.T.Z configuration P.T.Z configuration includes two submenus: serial port and advance ① Serial port Step 1: enter into system configuration P.T.Z configurationserial port; refer to Fig 4-37: Step 2: tick off Enable and then setup the value of address, baud rate and protocol according to the settings of the speed dome. Step 3: user can setup all channels with same parameters. Fig 4-37 P.T.
DVR User Manual Definitions and descriptions of network stream: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600. Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY, N-control.
DVR User Manual Fig 4-40 preset set-setting b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome; c. select the serial number of the preset point. Click PTZ light. button to enable the PTZ wiper and click button to enable the Note: PTZ must support wiper and light, these two functional buttons can take effect.
DVR User Manual that preset point; click Modify icon to modify the setting of a preset point. User can click those icons to adjust the position of preset point. Click Preview button to preview the cruise line; click OK button to save the setting; click Exit button to exit current interface. c. select a preset point in the cruise line list box.
DVR User Manual 4.9.1 Reset Reset all settings the device will reboot. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup function, and then import specified data files from mobile storage device to DVR. 4.9.3 Block/Allow list Fig 4-44 Block/Allow list Here authorized user can prohibit computer users within a certain IP address segment from accessing to DVR or admit computer users within a certain IP address segment into DVR.
DVR User Manual 5 Record search & playback and backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time search Step1: enter into Search configurationtime search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: select channel, screen display mode, the highlight date in the calendar means have record data Step3: select a date, press Search button, click the time grid to set the play start time or input play record time manually.
DVR User Manual Note: the vertical column means hours, horizontal column means channels. Step4: click Play button to playback record; click the relevant buttons on the screen to do operation: Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button, click this button, the whole interface can be expanded. Click button to select channels to show live images in the playback interface.
DVR User Manual 5.2 Event search Step1: enter into Search configurationevent search; refer to Fig 5-2: Fig 5-2 Search configuration-event search Step2: click Search button to display the searched event information in the event list box. User can select date and channel. Then tick off Motion, Sensor or All accordingly. Step3: double check a certain record file to playback. Note: when the monitor resolution is VGA800*600, the event search interface will appear a hide button.
DVR User Manual Fig 5-3 Search configuration-file management Step2: After clicking Search button, the searched files will be displayed in the file list box; user can select date, channels accordingly. Lock: select a file and click Lock button to lock this file, after that, that file will not be deleted or covered. Unlock: select a locked file and click Lock button to unlock this file Delete: select an unlocked file and click Delete button to delete this file.
DVR User Manual 5.5 Backup This unit supports backup by built-in SATA DVD Writer with USB Flash. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup. Step1: enter into backup configuration; refer to Fig 5-4: Fig 5-4 backup configuration Step2: set the start & end time, select channels, click Search button, the searched data will be displayed in the data backup list box Step3: select a data file or tick off “All” to select all data files.
DVR User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to the set date. Note: if there are overlapping files, a “+” character will show behind the channel ID. 6.1.
DVR User Manual Disconnect: the administrator authorized to disconnect the client terminal. When disconnected, that PC will not be able to access the device within five minutes. 6.1.6 Record information In this interface, a user can check resolution, ftp and record status including sensor alarm recording, motion recording, manual recording or schedule recording. 6.2 Manual alarm In this interface, user can check the relevant parameters of manual alarm. 6.3 Disk management 1.
DVR User Manual 6.4 Upgrade At present, it only supports USB update. Get the software from your vendor when there is a new software version, and make sure it is corresponding with the DVR. User can check the USB information in Disk management. Upgrade method: the user needs to copy the upgrade software which gets from vendor into the USB storage device and then connect to the USB port.
DVR User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
DVR User Manual IP address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to FAQ Q8. 2. Connect the DVR to internet directly. Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPPoE and then input user name and password received from your ISP. Next, click „Apply‟.
DVR User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”. Second: Select ApplicationsRight click “Safari. App”Select “Get Info”. Third: Select “open in 32- bit mode”.
DVR User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
DVR User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.
DVR User Manual Step 5: Click icon and then select the Active X control, the welcome interface will be shown. Click “Continue””Install” button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser.
DVR User Manual 7.
DVR User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off channels form 1-ch to 16-ch at random to display the live pictures, 8 channels can be selected at most. Then click OK button to confirm the setting.
DVR User Manual device and set the relative parameters manually. User can control the dome up, down, right, left or stop rotating on Control Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right.
DVR User Manual Click the right mouse on the live interface, a pull-down menu will appear as below Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FPS （NTSC）for every channel, but it needs higher network bandwidth simultaneously; second stream has low frame rate, max 6FPS （PAL）/7FPS（NTSC） for every channel, it requires low network bandwidth. Therefore, users can select the stream according to their bandwidth.
DVR User Manual Fig 7-5 Play record file interface This DVR supports remote time search, event search and file management.
DVR User Manual Fig 7-6 time search interface Step2: click “Search” button. The record data will be displayed in the data information list box; the highlight date in the area② means have record data, click those data; select the record channels in area③ Step3: User can set the data playing time and display mode in the area① as required Step4: Select certain item from the data information list box.
DVR User Manual mode, research, etc.
DVR User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor.
DVR User Manual Fig 7-9 file management interface Lock: select certain file item in the file list box and then click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file and then click “unlock” button to unlock this file Delete: select an unlock file and then click “delete” button to delete this file from file list 70
DVR User Manual 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time and then click “search‟ button to display the file information in the file list box Step2: select backup files and click “browse” button to set the save path. Then click “backup” button to start backup. The backup files will be saved on user‟s PC.
DVR User Manual 7.5 Remote System configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters. When one user setup parameters of a certain item, others cannot setup this one.
DVR User Manual 7.6 Remote Management Remote Information Search The system will automatically record the working condition and operation process during the period of work. User can view information, such as username, IP address and so on. Enter into INFO→Log. User can set the start time to view the log record as follows: Fig 7-12 Remote information search Note: There may be subtle differences with respect to functions of remote surveillance between through IE and through Apple PC.
DVR User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
DVR User Manual Step5：Input the server‟s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Refer below picture in the left: Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: refer below picture in the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.
DVR User Manual Step1：Firstly enable the network access on mobile phone. Then run Web browser. Step2：Input the DVR server‟s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer picture in the left: Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer picture in the right: Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install.
DVR User Manual Step8：Input the server‟s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9：Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can do snapshot, change channels and control PTZ.
DVR User Manual Step 3: Click Superlive, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically.
DVR User Manual Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2. Install through PC.
DVR User Manual Step 1: Install iTunes store in PC and then login Step 3: Enable “search” Step 2: Connect iPhone and PC function to search “Superlive” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “Superlive”, and then click “apply” button 80
DVR User Manual Operation Instruction for Superlive (iphone) 1. Login interface Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2. Main Interface 【Playback】 【Log】 log record 【Live】 live view 【Information】 【Logoff】 3.
DVR User Manual Mark 1 Group H-Reverse Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set the cruise line Spe
DVR User Manual 4. 5. Image view interface, refer below picture in the left: Record Playback interface, refer below picture in the right: Click the record file to playback. 6. Server list Interface, refer to below picture in the left: 7.
DVR User Manual Record file clip size: Single video size. When the video size is greater than setup value, change another video files Reserved disk space: Reserved SD Card disk space, when the disk space is less than setup value, the video will be stopped Display config： Display mode: User can select one live picture display or four live picture displays Remember display order: User can choose whether to remember display order or not. Alarm config：Select Audio Alarm.
DVR User Manual Step 1: run Google Market program Step 3: press “Install” button Step 2: search”Superlive” Step 4: click “OK” button 85
DVR User Manual Step 5: user can view the download and install process in notifications; finished download, the software will install automatically. Login Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
DVR User Manual Main menu 【Playback】 playback record file 【Log】 log record 【Live】 live view 【Information】 【Logoff】 【Image】 【Server List】 device list software setting 【Settings】 【Help】 logoff and return to login interface device information view Live view （Fig 2） ( Fig 1） 87 image view software help center
DVR User Manual Mark 1 Group Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Set the cruise line Preset Select the preset point Image view Previous Next Zoom out Delete Zoom in 88 Return to main menu
DVR User Manual Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3） （Fig 4） Click the record file (Fig 3) to playback (Fig 4) Server list 89
DVR User Manual Config interface Alarm setting Tick off Sound Alarm ， when Video Loss/Sensor/Motion happen ， trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm Storage setting User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is Path Reserved disk space Video clip size Remove all recorder files before Information view 90 /SDCard/.
DVR User Manual 8.5 Installation and operation Methods for BlackBerry Mobile phone Client 8.5.1 Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “Superlive” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically.
DVR User Manual Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. (1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure in the left. (2) Enter into Menu->Option->Cache Operations, clear up browser cache.
DVR User Manual Enter server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2. Main interface Playback Log Information Logoff Live 3.
DVR User Manual Note: User can click Mark 1 Return button on the Blackberry phone to return the previous interface.
DVR User Manual 4. Server list 5. Software configuration 6.
DVR User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
DVR User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c. The mouse is incompatible.
DVR User Manual ③ Enable all the sub options under “ActiveX controls and plug-ins” refer to Fig 8-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus block activeX. Please uninstall or close them. Fig8-1 Fig8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected.
DVR User Manual Solution: Please check the connection of hard-disk cable and data cable and make sure they are well connected; If still not working, please unplug them and then try re-plugging again; Second possible reason: It is forced to stop because hard disk has disabled track which causes the system checking hard disk cannot skip Solution: Change another new hard disk or reformat the broken one Q10: How to input password and digital numbers The method to input password and digital numbers is to click t
DVR User Manual HDD RAM VGA OS DirectX 80G 512M NVIDIA GeForce MX440/FX5200 ATIRADEON 7500/X300 Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA 9.0 Q13: What are the PC configurations for 16-ch real time product with fully open channel mainstream? PC Module CPU Motherboard HDD RAM VGA OS DirectX Parameters Intel Core(TM)2 Duo CPU E4600 G31/P31 chip 80G 1GB GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA 9.
DVR User Manual b. Right click IE browser (refer to Fig 14-2), select Run as administrator to run browser.
DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
DVR User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2.
DVR User Manual 3. Compatible HDD list Brand Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 ST31000340SV Seagate Pipeline HD.2 Seagate Barracuda 7200.10 Seagate Barracuda 7200.10 ST3250310AS Seagate Barracuda 7200.11 ST3160813AS Seagate Barracuda 7200.10 ST380815AS Maxtor Diamondmax 21 STM3160215AS HITACHI Deskstar HDS721616PLA380 HITACHI Deskstar WD WD1600JS Samsung HD161HJ 104 Capacity 2TB 1.
DVR User Manual Appendix D 4-CH Specifications Compression format Video output H.264 Main Profile Video input VGA Resolution Record Resolution Composite：1.
DVR User Manual Appendix E 8-CH Specifications Compression format Video output H.264 Main Profile Video input VGA Resolution Record Resolution Composite：1.
DVR User Manual Appendix F 16-CH Specifications Compression format Video output H.264 Main Profile Video Input VGA Resolution Record Resolution Composite：1.
450011000157 A6
