User Manual

Digital Video Recorder User Manual
22
4.2.2 Main monitor
Step1: enter into system configurationlive configurationmain
monitor; refer to Fig 4-8:
Step2: select split mode: 1×1、2×2、2×3、3×3 and channel
Step3: dwell time: the time interval for a certain dwell picture
display switching to next dwell picture display
Step4: selected the split mode, then setup current picture group.
Click button to setup the previous channel groups of dwell
picture, click button to set the latter channel groups of dwell
picture.
Step5: click “default” button to resort default setting; click “apply” Fig 4-8 live configuration-host monitor
button to save the setting; click “exit” button to exit current interface.
4.2.3 Spot
Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9:
Step2: select split mode: 1×1and channel
Step3: dwell time: the time interval for a certain dwell picture
display switching to next dwell picture display
Step4: selected the split mode, then setup current picture group.
Click button to setup the previous channel groups of dwell
picture; click button to set the latter channel groups of dwell
picture.
Step5: click “default” button to resort default setting; click “apply”
button to save the setting; click “exit” button to exit current
interface Fig 4-9 live configuration-Spot