DVR User Manual For H.
Digital Video Recorder User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual Table of Contents 1 Introduction ..................................................................................................................................................................... 1 1.1 DVR Introduction......................................................................................................................................................................................... 1 1.2 Main Features ................................................
Digital Video Recorder User Manual 4.2.1 Live................................................................................................................................................................................................. 21 4.2.2 Main monitor .................................................................................................................................................................................. 22 4.2.3 Spot ..........................................................
Digital Video Recorder User Manual 4.6.5 Other settings................................................................................................................................................................................. 39 4.7 User management configuration................................................................................................................................................................ 42 4.8 P.T.Z configuration........................................................
Digital Video Recorder User Manual 7.1 IE Remote Surveillance ............................................................................................................................................................................. 56 7.1.1 On LAN .......................................................................................................................................................................................... 56 7.1.2 On WAN..........................................................
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 128MB for every video file packaging 4 audio channels available Two record search mode: time search and event search Support 4/8/16 screen playback simultaneously Support deleting
Digital Video Recorder User Manual view, manual record, playback, PTZ control and remote live view Support 1 administrator and 63 users. Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive Notice: 1. 4/8/16-ch DVR supports one SATA hard drive. 24-ch DVR supports three SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. Please refer to “Appendix C Compatible Devices 2”. 2.
Digital Video Recorder User Manual 2.2 Front Panel Instructions Notice: The front panel descriptions are only for reference; please make the object as the standard. Item 1 Type Work state indicator Name Power HDD Net Backup Play REC MENU/+ BACKUP/- Compound button 2 RECORD/FOCUS REW/SPEED SEARCH/ZOOM PLAY /IRIS FF/ P.T.Z.
Digital Video Recorder User Manual Item Type Digital button Name 0/10+ 4 Input button 5 IR receiver Direction button Multi-screen Enter button IR 6 USB USB port 7 POWER POWER Description Input number0, 10 and the above number together with other digital keys Change direction to select items Change screen display mode like1/4/9/16 channel Confirm selection For remote controller To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Shot sw
Digital Video Recorder User Manual Item Name Description 1 Video out Connect to monitor Connect to monitor as an AUX output channel by channel. Only video display, no menu show Audio output, connect to the sound box Video input channels from 1-4 POWER INPUT VGA output, connect to monitor Network port Connect USB mouse or connect external USB devices Connect to speed dome Connect to keyboard 1-ch relay output.
Digital Video Recorder User Manual Item Name 1 Video out 2 Spot out 3 4 5 6 7 8 9 10 11 12 13 14 Audio out Video in DC12V VGA port LAN USB port P/Z K/B ALARM OUT + 5V and GND ALARM IN Audio in Description Connect to monitor Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item Name 1 2 3 4 5 6 7 8 9 10 11 Audio out Audio in VGA port Video out P/Z K/B ALARM OUT + 5V and GND ALARM IN USB port NET 12 Spot out 13 14 Video in DC12V Description Audio output, connect to the sound box 4 CH Audio input VGA output, connect to monitor Connect to monitor Connect to speed dome Connect to keyboard 1-ch relay output. Connect to external alarm.
Digital Video Recorder User Manual Item Name 1 2 3 4 VGA port Video out NET USB port 5 Spot out 6 7 8 9 10 11 12 13 Video in Audio in P/Z ALARM OUT K/B ALARM IN DC12V Audio out Description VGA output, connect to monitor Connect to monitor Network port Connect USB mouse or connect external USB devices Connect to monitor as an AUX output channel by channel. Only video display, no menu show Video input channels from 1-24 4 CH Audio input Connect to speed dome 1-ch relay output.
Digital Video Recorder User Manual Item Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Power Button INFOR Button REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button 15 PTZ Control Button Fig 2.7 Remote Controller Function Soft switch off to stop firmware running. Do it before power off.
Digital Video Recorder User Manual Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0.
Digital Video Recorder User Manual If want to input the value, move cursor to the blank and click. An input window will appear as Fig2.7. It supports digitals, letters and symbols input. Fig 2.7 Digital Numbers and Letters Input Window Users can change some value by the wheel, such as time. Move cursor onto the value, and roll the wheel when the value blinks. It supports mouse drag. I.e. Set motion detection area: click customized, hold left button and drag to set motion detection area.
Digital Video Recorder User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.
Digital Video Recorder User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456” The concrete operation steps for change password, add or delete user please refer to 4.7 User management configuration for more details. 3.
Digital Video Recorder User Manual 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. User can do concrete operation by click the buttons on screen.
Digital Video Recorder User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Click the Fig 4-1 menu toolbar icon beside the screen display mode to display a channel select dialog. 6/8 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Click icon to set up picture-in-picture.
Digital Video Recorder User Manual Playback: Click this button, the device can playback the record files. User can click button and drag it anywhere with the left mouse. Click Menu button, the interface will pop-up as Fig 4-2; press MENU button on the front panel or operate with remote controller also can display the main menu. Click Setup icon will pop-up the Setup menu: Fig 4-2 main menu Setup menu 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.
Digital Video Recorder User Manual Show system time: display time in live. Startup wizard: tick off this item, there will display an opening wizard with time zone and time setup information Max online uses: set the max user amount of network connection Video output: the resolution of live display interface, range from: VGA800*600, VGA1024*768, VGA1280*1024 and CVBS. Note： When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor. Language: setup the menu language.
Digital Video Recorder User Manual Fig 4-4 basic configuration-time & date 4.1.3 DST Step1: enter into system configurationbasic configurationDST; refer to Fig 4-5: Fig 4-5 basic configuration-DST Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual 4.2 Live configuration Live configuration includes four submenus: live, main monitor, Spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast. Step1: enter into system configurationlive configurationlive; refer to Fig 4-6: Note: Click Camera Name to see a soft keyboard. User can self-define the camera name.
Digital Video Recorder User Manual 4.2.2 Main monitor Step1: enter into system configurationlive configurationmain monitor; refer to Fig 4-8: Step2: select split mode: 1×1、2×2、2×3、3×3 and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step4: selected the split mode, then setup current picture group. Click button to setup the previous channel groups of dwell picture, click button to set the latter channel groups of dwell picture.
Digital Video Recorder User Manual 4.2.4 Mask User can setup private mask area on the live image picture, max threes areas. Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask area, refer to below picture. Click Apply button to save the setting. Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to save the setting. Fig 4-10 live configuration-mask Setup mask area Live image mask area 4.
Digital Video Recorder User Manual 4.3.1 Enable Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11: Parameter Record Audio Meaning Record switch of every channels Enable live record audio Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Digital Video Recorder User Manual Parameter Resolution fps Meaning Support CIF, D1, HD1 Quality The higher the value is, the clearer the Recorded image is. Six options: lowest, lower, low, medium, higher and highest. Range from 1-30（NTSC）1-25(PAL) Fig 4-12 record configuration-record bit rate 4.3.3 Time Step1: enter into system configurationrecord configuration time; refer to Fig 4-13: Pre-alarm record time: the record time before event happen i.e.
Digital Video Recorder User Manual Fig 4-13 record configuration-time 4.3.4 Stamp Stamp：User can overlap the channel name and time stamp on video.
Digital Video Recorder User Manual Step2: tick off camera name, time stamp; click Setting button, and then user can use cursor to drag the camera name and time stamp in random positions. Please refer to below Figures: Before drag after drag Step3: user can also setup all channels with same parameters. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
Digital Video Recorder User Manual 4.4.1 Schedule The volume means the seven days of a week from Monday to Sunday; the row means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area, gray means unchecked area.
Digital Video Recorder User Manual 4.4.2 Motion Step1: enter into system configurationschedule configurationmotion; refer to Fig 4-17: Step2: the setup steps of motion are familiar with schedule; user can refer to 4.4.1 Schedule for details. Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.
Digital Video Recorder User Manual Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5 Alarm configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out. 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule.
Digital Video Recorder User Manual Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger Step3: After selecting Buzzer, there will be triggered buzzer alarm out; Full screen alarm: when triggered alarm, there will pop up full screen alarm; Email: tick of this function. When an alarm trigged, a notification email will be sent to user‟s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels.
Digital Video Recorder User Manual Fig 4-22 sensor-schedule Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5.2 Motion Motion includes two sub menus: motion and schedule. ① Motion Step1: enter into system configurationalarm configurationmotion; refer to Fig 4-23: Step2: enable motion alarm and set alarm hold time which means time interval between two adjacent detective motions.
Digital Video Recorder User Manual Fig 4-24 motion-area Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value is the higher sensitivity you get.
Digital Video Recorder User Manual 4.5.3 Video loss Step1: enter into system configurationalarm configurationvideo loss; refer to Fig 4-26: Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual 4.5.5 Alarm out Alarm out includes three sub menus: alarm out, schedule and buzzer ① Alarm out Step1: enter into system configurationalarm out; refer to Fig 4-28: Step2: in this interface, set relay alarm out name, select hold time which means the interval time between the two adjacent alarms. Step3: user can setup all channels with same parameters. Tick off “all” to do relevant setup.
Digital Video Recorder User Manual Server port: communication port Step3: After selecting the "Obtain an IP address automatically", the device will distribute IP address, subnet mask, and gateway IP and DNS server. Step4: enable PPPoE to directly connect the DVR to internet via ADSL and then input the user name and password; click TEST button to test the effectiveness of the relevant information. Fig 4-29 network configuration-network 4.6.
Digital Video Recorder User Manual Step4: click “apply” button to save the setting; click “exit” button to exit current interface. Parameter FPS Resolution Quality Meaning Range from: 1-25 Support CIF The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. Fig 4-30 network configuration-sub stream 4.6.
Digital Video Recorder User Manual Attaching image: Tick off this item. The system will attach images when sending the emails. Fig 4-31 network configuration-email 4.6.4 Server This function is mainly used for connecting ECMS. The user needs to enable the active report first in the ECMS when adding a new device. Then enter into the server interface and enable it. Input the IP address and port of the transfer media server of ECMS. The default server port is 2009.
Digital Video Recorder User Manual 4.6.5 Other settings Step1: enable DDNS server: user needs to input user name， password and host domain name of the registered website, click TEST to test the effectiveness of the relevant information. Step2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Note: The domain name server that selected by user is a banding domain name of DVR.
Digital Video Recorder User Manual can double-click certain icon and check the IP address of the device. If “Show icons for networked UPnP devices” can‟t display in the “Network Tasks” list box, please follow the below operation: Click “Tools”-- “Folder options” Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1． Domain name Registration （Take www.dyndns.com for example） Note: Users can self-define the hostname, username and password. Input www.dyndns.
Digital Video Recorder User Manual Then create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. 2． DVR Setting （1） Domain name According to the domain name registration of “DDNS”，the domain name for DVR is “www. abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client.
Digital Video Recorder User Manual ② Enter into configuration interface of the router to map the server port and IP address (if the user enables UPnP function, he can skip this step). Click Save button to save the setting ③ Login IE browser and input registered domain name “http://www.abc.dyndns.tv”, connect to DVR client. Note If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.
Digital Video Recorder User Manual Fig 4-34 user management configuration Fig 4-35 add-general ① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK button, this user will be added into the user list box; click Exit button to exit the current interface.
Digital Video Recorder User Manual 4.8 P.T.Z configuration P.T.Z configuration includes two submenus: serial port and advance ① Serial port Step1: enter into system configurationP.T.Z configurationserial port; refer to Fig 4-37 Step2: tick off Enable and setup the value of address, baud rate and protocol according to the settings of the speed dome. Parameter Address Baud rate Protocol Simulative Cruise Meaning The address of the PTZ device Baud rate of the PTZ device.
Digital Video Recorder User Manual Fig 4-38 P.T.Z configuration-advance Fig 4-39 advance-preset setting a. in the preset set interface, click Setting button to see a window as Fig 4-40 b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome; Fig 4-40 preset set-setting c. select the serial number of the preset point.
Digital Video Recorder User Manual Fig 4-41 cruise setting b. click Add icon Fig 4-42 cruise set-modify cruise line to set the speed and time of preset point; select a preset point and click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click those icons to adjust the position of preset point. Click Preview button to preview the cruise line and then click OK button to save the setting. Next, click Exit button to exit current interface. c.
Digital Video Recorder User Manual 4.9 Advanced Advanced configuration includes three submenus: reset, import/export and Block/Allow list. 4.9.1 Reset Reset all settings the device will reboot. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup function, and then import specified data files from mobile storage device to DVR. 4.9.
Digital Video Recorder User Manual 5 Record search & playback and backup Search configuration includes four submenus: Time Search, Event Search, File Management and Image. 5.1 Time search Step1: enter into Search configurationTime Search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: select channel, screen display mode, the highlight date in the calendar means have record data Step3: select a date and press Search button.
Digital Video Recorder User Manual Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button. Click this button to expand the whole interface. The method of record backup during a certain period in the playback interface: Select the start time by dragging the slider and click icon. Then select the end time and click this icon again to confirm the record period. Next, click icon to backup the record during this period. 5.
Digital Video Recorder User Manual Fig 5-2 Search configuration-event search 5.3 File management Step1: enter into Search configurationfile management; refer to Fig 5-3: Step2: When clicking Search button, the searched files will be displayed in the file list box; user can select date, channels accordingly. Lock: select a file and click Lock button to lock this file, after that, that file will not be deleted or covered.
Digital Video Recorder User Manual Fig 5-3 Search configuration-file management 5.4 Image In this interface, user can set start, end time and channels to search the captured images and save, lock or delete these images. There are at most 2000 images which can be saved in the SATA disk. If there are more images saved in the SATA disks than 2000 images, those additional images will supersede prior images.
Digital Video Recorder User Manual Fig 5-4 backup configuration Step2: set the start & end time, select channels and click Search button to display the searched data in the data backup list box Step3: checked a data file or tick off “All” to select all data files, click Backup button, Backup information dialog box will pop-up. Step4: in the backup information interface, user can check the relevant information of backup files, storage type, save file type, etc. click Start button to starting backup.
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to set date. 6.1.3 Log information In this interface, user can check relevant log information according to set date; 6.1.
Digital Video Recorder User Manual 6.1.6 Record information In this interface, a user can check resolution, ftp and record status including sensor alarm recording, motion recording, manual recording or schedule recording. 6.2 Manual alarm In this interface, user can check the relevant parameters of manual alarm. 6.3 Disk management 1. Format the disk Step1: enter into disk management interface Note: please format the hard disk before record.
Digital Video Recorder User Manual Software Upgrade: user needs to copy the upgrade software which get from vendor into the USB storage device and then connect to the USB port. Enter MenuUpgrade, the upgrade software name is displayed in the upgrade list box, select that software and click Upgrade button to start upgrading. Please wait for a while when the system is rebooted. Please don‟t cut off power during upgrading. The original configuration will be reserved after upgrade. 6.
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
Digital Video Recorder User Manual after IP address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ8. 2. Connect the DVR to internet directly. Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPPoE and then input user name and password received from your ISP.
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon safari and select “Show in Finder”. Second: Select ApplicationsRight click “Safari. App”Select “Get Info”.
Digital Video Recorder User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
Digital Video Recorder User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.
Digital Video Recorder User Manual button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser. Input the IP address and http port to enter into the login interface of DVR. 7.2.
Digital Video Recorder User Manual 7.
Digital Video Recorder User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off channels form 1-ch to 8-ch at random to display the live pictures, 6 channels can be selected at most. Then click OK button to confirm the setting.
Digital Video Recorder User Manual Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button.
Digital Video Recorder User Manual Click the right mouse on the live interface, a pull-down menu will appear as below Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FPS （NTSC）for every channel, but it needs higher network bandwidth simultaneously; Sub-stream has low frame rate, max 6FPS （PAL）/7FPS（NTSC） for every channel, it requires low network bandwidth.
Digital Video Recorder User Manual 7.4 Remote playback & backup 7.4.1 Remote playback Click button to enter into record playback interface, refer to Fig 7-5: Select the record date and channels; double-click the file name in the record file list box, user can play that file and preview the picture. Fig 7-5 Play record file interface This DVR supports remote time search, event search and file management.
Digital Video Recorder User Manual Step1: Enter into Searchtime search; refer to Fig 7-6: Fig 7-6 time search interface Step2: click “Search” button.
Digital Video Recorder User Manual Fig 7-7 Time search playback By Event Search: Step1: Enter into Searchevent search; refer to Fig 7-8: 68
Digital Video Recorder User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box.
Digital Video Recorder User Manual Step1: Enter into Searchfile management; refer to Fig 7-9: Fig 7-9 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock” button to unlock this file Delete: select an unlock file, click “delete” button to delete this file from file list 70
Digital Video Recorder User Manual 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time and then click “search‟ button to display the file information in the file list box. Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user‟s PC.
Digital Video Recorder User Manual 7.5 Remote System Configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters.
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
Digital Video Recorder User Manual Step3：Click “Yes” to start downloading and installing: Step4：PCam will be opened automatically after installed Step5：Input the server‟s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Step6：Camera 1 is the default channel after login.
Digital Video Recorder User Manual 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit. Symbian S40 Symbian UIQ Symbian S80 Symbian S60 rd Symbian S60 3 Edition-Symbian OS v9.1 rd Symbian S60 3 Edition with FP 1-Symbian OS v9.2 rd Symbian S60 3 Edition with FP2-Symbian OS v9.3 th Symbian S60 5 Edition-Symbian OS v9.4 Symbian S60 5.1 Edition-Symbian OS v9.
Digital Video Recorder User Manual Step6：Run Scam program. It will enter a function interface. Live view: to do mobile live view Image view: to check the pictures snapped in live view System setting: Login setting and Alarm setting. Help: function indication and help Step7：Click System setting--->Login Setting to enter login interface. Step8：Input the server‟s address, ID and password respectively. Then save.
Digital Video Recorder User Manual 8.3 The operation method for iPhone mobile clients 1. Install through iphone. Step 1. Open App Store function of iphone Step 2.
Digital Video Recorder User Manual Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2.
Digital Video Recorder User Manual Step 3: Enable “search” function to search “SuperCam” 79 Step 4: Click “free application” button
Digital Video Recorder User Manual Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button Operation Instruction for iphone 1. Login interface Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual 2. 3.
Digital Video Recorder User Manual Mark 1 Group H-Reverse Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set th
Digital Video Recorder User Manual 4. Image view interface 5. Record Playback interface Click the record file to playback.
Digital Video Recorder User Manual 6. Server list Interface 7.
Digital Video Recorder User Manual Record file clip size: Single video size. When the video size is greater than setup value, change another video files Reserved disk space: Reserved SD Card disk space, when the disk space is less than setup value, the video will be stopped Display configuration： Display mode: User can select one live picture display or four live picture displays Remember display order: User can choose whether to remember display order or not. Alarm configuration：Select Audio Alarm.
Digital Video Recorder User Manual 8.
Digital Video Recorder User Manual Step 5: user can view the download and install process in notifications; finished download, the software will install automatically. Login Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual Main menu 【Playback】 playback record file 【Image】 【Log】 log record 【Live】 live view 【Server List】 device list software setting 【Settings】 【Information】 device information view 【Help】 【Logoff】 logoff and return to login interface Live view （Fig 1） （Fig 2） 88 image view software help center
Digital Video Recorder User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Group Mark 2 Preset Select the preset point Set the cruise line Image view 89 Previous Next Zoom out Delete Zoom out Return t
Digital Video Recorder User Manual Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3） （Fig 4） Click the record file (Fig 3) to playback (Fig 4) Server list 90
Digital Video Recorder User Manual Config interface Tick off Sound Alarm ，when Video Loss/Sensor/Motion Alarm setting happen，trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm Storage setting Path Reserved disk space Video clip size Remove all recorder files before User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is /SD Card/.
Digital Video Recorder User Manual Information view 8.5 Installation and Operation methods for blackberry mobile phone Client 8.5.1 Installation instruction for Blackberry mobile phone client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown.
Digital Video Recorder User Manual 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. 1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure.
Digital Video Recorder User Manual 2) Enter into Menu->Option->Cache Operations, clear up browser cache. Note：When user used the SuperCam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->SuperCam and click “Disable Compatibility” button. This problem will be solved. 8.5.2 Operation method for Black berry mobile phone client 1.
Digital Video Recorder User Manual Enter server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
Digital Video Recorder User Manual 3. Live view Note: User can click Return button on the Blackberry phone to return the previous interface.
Digital Video Recorder User Manual Mark 1 Current viewing channel 4.
Digital Video Recorder User Manual 5. Software configuration 6.
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c. The mouse is incompatible.
Digital Video Recorder User Manual Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller.
Digital Video Recorder User Manual a. Enter Control PanelUser Account and Family Safety User Account Control(refer to below picture); click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser.
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
Digital Video Recorder User Manual Appendix C 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Compatible Devices Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2. Compatible HDD list Brand Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 ST31000340SV Seagate Pipeline HD.2 Seagate Barracuda 7200.10 Seagate Barracuda 7200.10 ST3250310AS Seagate Barracuda 7200.11 ST3160813AS Seagate Barracuda 7200.
Digital Video Recorder User Manual Appendix D 4-CH Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Video input VGA Resolution Record Resolution Composite：1.
Digital Video Recorder User Manual Appendix E 8-CH Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Video input VGA Resolution Record Resolution Composite：1.
Digital Video Recorder User Manual Appendix F 16-CH Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video input VGA Resolution Record Resolution Composite：1.
Digital Video Recorder User Manual Appendix G 24-CH Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video input VGA Resolution Record Resolution Composite：1.
450011000171 A7
