Manualshelf

Owner's manual

ManualsBrandsLT Security ManualsVideo surveillance systemsLTD2308
31323334353637383940
Digital Video Recorder User Manual
29
3.3.5 Alarm Recording
This unit supports recording channels and PTZ linking after alarm.
STEP1 Enter ALARM configuration, see Fig 3.13 Sensor Alarm Setup. Select cameras
Fig 3.13 Sensor Alarm Setup
STEP2 Enable Detection first. Set Device type.
STEP3 Enter Trigger configuration. Set alarm out, recording cameras and linked PTZ, referring to 3.3.4 Motion
Detection Recording STEP4-5
STEP4 Set Alarm in hold time. It is the interval time between the two adjacent efficient alarms. This is similar with Hold
time in MOTION configuration.
STEP5 Set Alarm out hold time and Buzzer hold time. Click OK to save settings
STEP6 Enter SCHEDULE configuration. Select Sensor and relative cameras to set, referring to chapter 3.3.3 Timer
Recording.
Notice: About preset and auto cruise, users can only select one at same time.
The actual post alarm record time equals Hold time in RECORD and Hold time in MOTION