H.
CONTENT 1 Introduction............................................................................................................................ 3 1.1 Main Feature ................................................................................................................... 3 1.2 Product features .............................................................................................................. 3 1.2.1 Parameter ..............................................................................
1 INTRODUCTION 1.1 Main Feature LTD2284HM is 4 channel CIF resolution digital video recorder DVR. Which have local recording, playback, support triple code remote network surveillance, data backup, parameter setting, motion detection, I/O alarm setting, PTZ and USB mouse. 1.2 Product features H.264 compression Two USB interface: USB2.0 for data backup, USB1.1 for mouse operation. 3.
Picture processing and storage Basic electricity output Linearity electricity Record style Audio video recorded simultaneously Audio compression ADPCM Picture compression H.
1.2.2 Basic Working Parameter Item Voltage input Voltage output for camera Video impedance input Video output I/O Parameter Remark 19V DC 19V。 12V（+/-0.2） 12V，2A 75Ω 75Ω each channel。 1Vp-p 1Vp-p CVBS signal 0—2V Low voltage alarm 5V-30v High voltage alarm RS232 serial port, for external use RS485 Connect to PTZ, (Pelco-D，Pelco-P) SATA HDD One SATA with all capability Working temperature -10℃ - +50℃ Under normal conditions 1.
2 Device operation manual In device operation, the enter key on remote control has the same function as left click of the mouse. 2.1 Remote key instruction 2.1.
【0－9】keys：During setup, number keys are used to input values. For viewing channels 1,2,3 and 4, use 1,2,3 and 4 on numeric keypad respectively. 【＋】,【－】keys：During setup, plus and minus are used to select next or previous values. ▲， ： Up, Down directional keys: Move selection up and down in setup menu. ， ： Left, Right directional keys: Move cursor left or right in setup menu.
Exit the playback interface: Click the right key to exit during playback. Click the left key to enter into the setting interface. Click the left key to zoom in the window on the live view and playback video. Double click the left key will exit to the live view and playback multi-window interface. 1. Volume adjustment, colour adjustment, PTZ setting and VGA border operation. It is for setting the single channel for volume adjustment, PTZ control and colour adjustment.
2.1.3 Menu Tree You can control the DVR by the menu operation. The following tree diagram shows the menu structure and more details will be shown in next chapter.
2.2 System Operation 2.2.1 User Login 1. START-UP Connect the DC19V/3A adapter to DVR. When the DVR is started, 【POW】LED will be on and 4 images will be displayed on the screen. If the DVR is setup for motion detection or time record, the system will record automatically and the corresponding LED will be on showing the system is working normally. Remark: If there is no HDD in the device, or the device cannot read the HDD, it will display a 【H】 in live view. 2.
2.2.2 GUI OPERATION The main menu includes “SEARCH”,”RECORD”,”HDD”,”BASIC”，“ADVANCE”, and “EXIT”. Remark: To make the setting of submenu valid, you must press “APPLY”. It will not be workable if exit directly. This DVR has a special feature: Explanation and information will be showed automatically when you move the cursor on the Menu. 2.2.2.1 RECORD SEARCH Move the cursor to 【RECORD SEARCH】（Icon highlighted when selected）, press【Enter】 to enter into the setting interface.
Instructions: 1. MONTH: It will show all the recording status in this month. Green means normal recording, Red means alarm recording, Grounding means no recording. Click any date in this frame will search the recording status of that day, the searching result will be showed in the below date frame. 2. DATE: It will show all the recording status in this day, you can playback the recorded files in any period by clicking the corresponding period.
3. If setup as “on” in the【RECORD TIME】in 【BASIC SETUP】，it will show the date/time when playing back recorded file；If setup as “off” it will not display time； 4. During playback， press【SLOW】to play slowly；press【FORWARD】、【REVERSE】 to speed、reverse play； press【PAUSE/STEP】to pause and frame by frame play；press【Exit】 to exit from playback and return to the former menu； 5. When playback files finish, it will return to the file list interface. 2.
CHANNEL：ON: Means the channel is enabled to record. RESOLUTION：Setup resolution and code rate for recording, there are three options: HIGHEST, HIGH, NORMAL, corresponding to D1、HD1、CIF resolution. QUALITY ：There are three options: BEST, FINE AND NORMAL, corresponding to HIGHEST, HIGH AND NORMAL data stream standard. AUDIO：ON: Means the audio recording for all channels are enabled, OFF: Means audio recording is disabled. REC.MODE： POWER UP: Means the device will start recording when it starts up.
you selected. Scroll to APPLY and press ENTER to save the new settings. 2.2.2.3 HDD MANAGE Move the cursor to 【HDD】（Icon highlighted when selected）, press【Enter】to enter into the setting interface, and you can use direction keys or cursor to change the options. HDD STATUS：There are three status available, normal, un-format, No HDD. If HDD cannot run normally（including unformat and no HDD）, there will be a 【H】displayed on video live view.
2.2.2.4.1 SYSTEM LANGUAGE SETUP Move cursor to select “system language” (The big icon means select ok) and press 【ENTER】to access the system language setup interface. System language is optional, including Chinese and English. You can choose the language you want. Remark: The device will restart when you finish system language setup. 2.2.2.4.2 DATA/TIME SETUP Move cursor to select “date/time” (The big icon means select ok) and press【ENTER】to enter into the date/time setup interface.
TIME FORMAT: Press ENTER to switch the time patterns; there are 12 HOURS and 24 HOURS for your selection. Remark: You must press【APPLY】to save after you modify the time and date, modification will not be saved if you exit directly. DST: Still under construction. 2.2.2.4.3 SECURITY （Icon highlighted when selected）, press【Enter】to access the Move the cursor to【SECURITY】 setting interface. DEVICE ID：Press【+】/【-】or number key to setup the Device ID PASSWORD：Press【APPLY】 to start or close the user password.
NAME: press【Enter】to enter the setting interface. POSITION: Name location is optional. You can press 【Enter】to switch from bottom left, top left, bottom right, top right and OFF. COLOR：press【Enter】to enter into setting interface as follow: Press【Enter】or【+】【-】key or directly drag the cursor to setup colors, including chroma, brightness, contrast and saturation, press【APPLY】to save the parameters once the setup is completed. PREVIEW：ON: Means the channel is allowed to view the live mode, OFF means not.
VGA RESOLUTION：press【Enter】to setup the VGA resolution, including: 1024*768、800*600 and 600*480. CAMERA SYSTEM: press【Enter】to select camera system: PAL or NTSC. VOLUME SETUP： move cursor to【VOLUME SETUP】，then press【Enter】to access volume setup interface, press【+】【-】or number keys or directly drag the cursor to adjust the volume. 2.2.2.4.6 EXIT Move the cursor to【EXIT】（Icon highlighted when selected），press【Enter】 to go back to the main menu. 2.2.2.
2.2.2.5.1 ALARM SETUP Move the cursor to【ALARM SETUP】（Icon highlighted when selected），press【Enter】 to access setting interface. I/O CHANNEL： Each channel corresponds an I/O status, which means when an alarm is triggered, it will activate the corresponding channel to start alarm recording. N.O：indicate I / O input level from high to low N.
2.2.2.5.3 MOTION DETECT Move the cursor to【MOTION DETECT】（Icon highlighted when selected），press【Enter】 to access setting interface. STATUS：Each channel has corresponding channel switch, press 【Enter】to turn on or turn off the motion detection for each channel. SENSITIVITY：each channel has corresponding sensitivity setting; including four standards: higher, high, medium and low, press【Enter】to switch.
Press the direction key on remote control to move cursor along the small pane: position of cursor is indicated by green frame. Press【Enter】to select or cancel motion detection of this small pane. When setup is finished, press【exit】to go back to MD setup interface and settings will be saved automatically. Remark: IR Operation: press [Menu] key to select or cancel all the screen. Mouse operation: click left and drag the frame to setup the region for motion detection. 2.2.2.5.
to enter into system maintain setup interface. AUTO RESET: When it is on, you can setup the time for device to restart. SYSTEM UPDATE: Copy the update file to the root directory of a thumb driver, then insert it into USB 1.0. Press [Enter] to upgrade the firmware and it will display the process of the system upgrade as follow: DEFAULT SETTINGS: Restore all the settings to factory settings. 2.2.2.5.
VERIFY: Options: None/Odd/Even/Mark/Space are available. Default setting is none. ADDRESS: Fill in the code of respective PTZ. 2.2.2.5.7 NETWORK SETUP Move the cursor to [NETWORK SETUP] (icon highlighted when selected), press 【Enter】 to access setting interface. TYPE: Options in Type include PPPOE, DHCP & Static. ● STATIC Select [Static] in the type, press [Enter] to access the interface as below: MEDIA PORT：transfers video data between client and device. WEB PORT: setup the port of IE browser via HTTP.
● DHCP Select DHCP and enter the interface as follow: MEDIA PORT：transfers video data between client and device. WEB PORT: setup the port of IE browser via HTTP. PPPOE username and password: enter the username and password provided by the internet service. Apply and reboot the system. After rebooting, the device will save it and set the PPPOE as default network type. The IP address will be automatically config as dynamic IP of WAN.
as default network type. The IP address will be automatically config as dynamic IP of WAN. DNS: press [Enter], [+], [-] or number keys to change the value. DDNS: move the cursor to DDNS and press [Enter] to enter the interface as follow: DDNS: Options are [ON/OFF]. If there is a DDNS service, setup to ON. SERVICE: Four services to select: 3322, dyndns, perfecteyes, LTSCCTV. HOST NAME: Input the name of the host server. USERNAME: Input the name of the user. PASSWORD: Input the password.
3 IE OPERATION 3.1 FEATURE Install the software through the IE browser of OS and you operate the network remotely and conveniently. DVR supports C/S, B/S, and visit in LAN and WAN, also supports IP and domain name visiting. 3.2 USER LOGIN Input the DVR local IP address in IE browser; If the port is changed, you should add the port number after IP address: e.g.: if DVR local IP is 192.168.3.97 (LAN) and the port is 8088, you should input http:// 192.168.3.97:8088.
3.3 OPERATION INTERFACE Options in the main interface include Live View, Playback and Setup. access. 3.3.1 Click 3.3.1.1 Click any option to LIVE to enter the interface as follow: PTZ CONTROL Zoom in and out, preset aperture and change the focus of the PTZ. up/down/left/right to the control movement of the PTZ. Click When one of the direction keys is pressed, the PTZ will keep circling at that direction until the stop key in the center of the wheel is pressed.
3.3.1.1.1 ZOOM Click to zoom in and out. Click to focus. Click 3.3.1.1.2 to change the size of aperture. PTZ PRESET Setup preset point. You can adjust using these three buttons: 3.3.1.2 PLAY Move cursor to the icon; it will be highlighted when selected. Open all windows. Capture picture, save in local disk. System save default route is C:/DVR. Quick-start to record video on all channels.
quickly open/close all windows. 3.3.2 REPLAY Click to enter playback interface. and to setup the month for searching; Click the top of calendar interface click ”REFRESH” at the calendar interface will display the recording information of current month. The highlighted date indicates video was recorded on that day. RED FRAME means the date is system date, click the date will search that days’ recording file list. For example, the above picture display 2008, Dec.
Double click one of the listed recorded video to playback. The file icon will change to following picture will appear: and the The above purple progress bar shows download progress, green progress bar shows playback progress. Switch between pause/play Stop play Fast play Slow play Pause at next frame Convert H.264 file to AVI file.
SOURCE FILE: Click DESTINATION FILE: Click to choose the H.264 file to convert to choose the directory for saving the avi file after the setting and the file convert will start. The convert progress bar Click shown below will show the progress of convert: 3.3.3 SETUP to enter setup interface. This interface includes record, alarm, PTZ, Click network, setting and system information. 3.3.3.1 Click of DVR.
3.3.3.2 Click of DVR.
3.3.3.3 PTZ Click of DVR. 3.3.3.4 Click of DVR.
3.3.3.5 Click of DVR.
BANDWIDTH: Set the bandwidth in kbps (128k、192k、256k、384k、512k、1024k) that you want to allocate for traffic that matches the internet. This bandwidth does not include audio. FILE SAVE PATH: the save path of captured picture and recording video. IE login password and DST settings you can set as DVR setting. 3.3.3.6 HOST INFO Click to access system information interface (see below picture). This interface includes HDD status, remain record time, firmware version and MAC Address.
4 DVR Installation Guideline 4.1 Product Overview 1. The Definition of Buttons and Connectors on Front Panel NO. TYPE NAME direction key include: up【 Direction key right【 】、down【 】、left【 】、 】four buttons, which can move cursor to setup and control PTZ.
2.
Connectors on Rear Panel Item Physical connector Connector description 1 POWER input DC 19V/4A 2 Power switch host power switch 3 Video output Two video output for connecting TV or monitor (BNC) 4 Video input For connecting analog video signal input (BNC) 5 Audio Input For connecting audio signal Alarm Input I/O alarm input, 4 for 4CH DVR and 8 for 8CH DVR Alarm Output I/O output for alarm RS485 RS 485 for connecting PTZ RS232 For connecting PC 6 Power supply for DC relay and the
4． Alarm Input and Output There are 8 sets of alarm input connectors and 1 set of output for this DVR. Alarm input is for connecting IR annunciator, fog sensor.
12V 24V 220V AC RELAY DVR I/O output The connection diagram of alarm output shown as following: 5.
4.2 HDD Installation Please installation the HDD as the following steps: 1）Uninstall the DVR and then you will see one HDD plate as following. 2）Connect HDD line as follows 3）Install the HDD on HDD plate as the following photo indicate and then screws around. 4）Fix the HDD plate on the DVR device and then cover the DVR and screw. Notice: Newly installed HDD should format before recording.
5.FAQ If your problem is not in below, call our hotline and we will resolve any issues or problems you may have. 1. Question: Why DVR can’t work after starting it? Answer: Check the adaptor input Check the on-off power line, does it well-connected? Check the on-off power Check the upgrade procedure whether it’s wrong Check the main board of DVR whether it’s ok 2.
Check the brightness of the picture is 0, and bring it back to its original default setting No video input signal or too weak Display settings in the preview set to be closed The hardware of DVR is fault 4.
circuit to check. Is activation of the audio source connected to the video channel? You can click to full-screen to determine. The hardware of DVR is fault 8. Question: Why there is no voice when playing back? Answer: Setting problem: open audio-video item Check the audio whether it is closed in playback interface 9. Question: Why the system time is not right? Answer: Setting wrong, or users didn’t click “Edit” to make it validity Battery not connected well The battery is invalid. Please change one. 10.
12. Question: How much space of HDD for recording per hour? Answer: Each channel takes about 14Mbyte for audio recording HDD space cost is related with “Best, Good, Middle” in “Record mode>Bit rate” and the video size of the period. If the video is still, HDD cost will be small; if the video is moving, HDD cost will be large.
Remote control batteries run out Remote control is damaged or the front panel of dvr is damaged 17. Question: Why WEB can’t log? Answer: Please check the network whether it’s connected. And check if the panel LINK or 100M LED display normally; use ping xxx.xxx.xxx.xxx (DVR IP) to check if the internet is well linked. Recommended Windows XP or Vista operating system, using IE6.0 browser or IE7.0 browser ActiveX control is been blocked. Please manual install ActiveX control. Please install DX8.
