Owner manual

Not allowed to enter on Saturdays and Sundays, these two days have a rest;
enter from Monday to Friday at working hours
Working hours: 08:30-18: 00;
Settings are as follows:
Time sect 2 definition ▲
Sunday 23:57-23:56
Monday 08:30-18:00
Tuesday 08:30-18:00
Wednesday 08:30-18:00
Thursday 08:30-18:00
Friday 08:30-18:00
Saturday 23:57-23:56
4.3.2 Grouping function settings
Grouping function settings can divide users into several parts, and different groups can be combined
into different unlocking combinations in order to facilitate the grouping management of access control.
Such groups can be combined as lots of unlocking combinations. System defines 5 groups: group 1, group
2, group 3, group 4, group 5. New registered users belong to group 1 by default, but these users also can be
re-assigned to all other groups.
Group time sect settings：Set group unlocking time, choose the completed setting number in group time sect.
Default to use time sect of group 1 for new registered user, but when user resets affiliated group, the user uses
corresponding group time sect, so firstly it needs to define the default time sect of each group.
Note：1System default group 1
Time sect choose to define number “1”.（default unlocking for new registered user）
The default time sect of group 2 has 1 time sect，may set three time sects at most, the relationship among
them is “or”.
Example group 2 settings of default time sect
group2 efficient in time sect :1、8、40 and the group validation mode is fingerprint, it also may choose other
defined time sect.
Group2 default time sect 01:08:40-fingerprint
Group validation mode settings
Set default validation mode of the device. Namely choose any kinds of combination mode of ID number, fingerprint,
password, ID (Mifare) card, default single fingerprint, there are 6 types to select. Only can choose one type. See
authentication mode for details
4.3.3 User door contact settings
Set affiliated user group, time sect of the using group, user time sect, validation mode of the using group,
27