Instruction Manual

- 56 -
【 WEB
WEB
WEB
WEB Port
Port
Port
Port 】 Default is 80. It is a very important port to recognize the IP device.
This 80 web port is dropped acquiescently, for example, if the IP address of your IP
device in LAN is 192.168.1.199:80, the default IP address will be 192.168.1.199. If
the web port is changed into other, it can ’ t be dropped. For example, if the port is
changed into 81, t he LAN IP address will be 192.168.1.199:81 。
In the same way, the WAN IP address will follow this rule, too.
NOTE: If you don't map this port, you won ’ t access the IP device via Internet
Explorer in WAN.
【 Data
Data
Data
Data Transfer
Transfer
Transfer
Transfer Port
Port
Port
Port 】 Default is 3000.
NOTE: If you don't map this port, you can ’ t access the IP device via Internet
Explorer in WAN: You won ’ t be able to open the webpage of the IP device via
using the IP address.
【 Data
Data
Data
Data Control
Control
Control
Control Port
Port
Port
Port 】 Default is 3001. It is a hidden port in the background
system. It has a certain conversion relation with the Data Transfer Port: Date
control port = date transfer port + 1.
If you change the date transfer port into 4000, the system will automatically
change date control port is 4001.
NOTE: If you don't map this port, you won ’ t get the image of the IP device when
accessing via WAN: You can access the IP device via Internet Explorer, but you
won ’ t be able to get the image.
【 Remote
Remote
Remote
Remote Transfer
Transfer
Transfer
Transfer Port
Port
Port
Port 】 Default is 3002. It is a hidden port in the background
system. It has a certain conversion relation with the Data Transfer Port: Remote
Transfer Port = Date Transfer Port + 2.
If you change the date transfer port into 4000, the system will automatically
change remote transfer port is 4002.
NOTE: If you don't map this port, you won ’ t get the recording in the SD card of the
IP device when accessing via WAN.