Instruction Manual

- 28 -
There are three methods to enable WIFI function: Static IP
Address/PPPOE/DHCP.

Static IP Address

PPPOE
If you choose to PPPOE, please contact y ou r network operators, to provide
the “ PPPOE User Name ” and “ PPPOE Password" ”

DHCP
The following parameters will keep the same under these three methods.

IP
IP
IP
IP Address
Address
Address
Address Based on network environment to fill out your own IP device
address

Subnet
Subnet
Subnet
Subnet Mask
Mask
Mask
Mask B ased on network environment to fill out
 Gateway
Gateway
Gateway
Gateway Keep this item the same with the IP address of your wireless router.
 DNS
DNS
DNS
DNS Keep the same with your route ’ s DNS. This item related to the
application of DDNS (Dynamic Domain Name Server) and Email Alarm.
NOTE: When connect the WAN via WIFI, Please enable the “ WIFI Gateway as
Default Gateway ” , and choose WIFI specification: 802.11b & 802.11g.
For detail Wireless setting, please refer to: 5.3 Wireless Settings