Logic Host Adapters USER'S GUIDE Ultra320 SCSI

2-14 Detailed Host Adapter Installation
Version 2.2 Copyright © 2002–2004 by LSI Logic Corporation. All rights reserved.
2.6 Completing the Installation
Before replacing the cover on your computer, complete the checklist as
shown in Table 2.2.
After you verify all items on the checklist, follow these steps:
Step 1. Replace the cabinet cover on your computer.
Step 2. Plug in all power cords, and turn on power to all devices and
your computer.
Step 3. Wait for your computer to boot up.
Note: To change default configurations of the Ultra320 SCSI host
adapters, refer to the Fusion-MPT™ Device Management
System User’s Guide.
Table 2.2 Host Adapter Installation Checklist
Verify Installation Procedures Done
Host adapter connection in PCI/PCI-X/PCI Express bus slot is
secure (level)
Internal SCSI bus connections are secure (pin-1 continuity)
External SCSI bus connections are secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device