Logic PCI to Dual Channel SCSI Host Adapter User's Guide

2-8 Installing the LSIU40HVD
Figure 2.3 SCSI Cables
2.2.3.1 Making Internal SCSI Bus Connections
This section provides step-by-step instructions about making internal
SCSI bus connections:
Step 1. If you are connecting an internal SCSI device, plug the 68-pin
connector on one end of a wide internal SCSI ribbon cable into
the connector J2, or J5 (see Figure 2.4).
SCSI Cables for Internal Connections
SCSI Cable for External Connections
68-pin High Density
68-pin VHDCI