Logic PCI to Dual Channel SCSI Host Adapter User's Guide

Detailed Installation Procedure 2-5
Figure 2.1 Hardware Connections for the LSIU40HVD
Step 6. Carefully insert the edge connector J1 (see Figure 2.1) of the
host adapter into the PCI slot. Make sure the edge connector
is properly engaged before pressing the board into place as
shown in Figure 2.2. You may notice that the components on a
PCI host adapter face the opposite way from those on other
non-PCI adapter boards you have in your system. This is
correct, and the board is keyed to go in only one way.
Channel B
68-Pin Internal
High Density
SCSI Interface
Channel A
68-Pin Internal
High Density
SCSI Interface
68-pin External
High Density
SCSI Interface
LSIU40HVD PCI Bus
Connector on Mainboard
Channel B
LED Connector
J7
Channel A
68-pin External
High Density
SCSI Interface
Channel B
J1
J5
J2
Channel A
LED Connector
J4
J3
J6