User guide

LSI Corporation
- 39 -
Syncro CS 9286-8e Solution User Guide
March 2013
Chapter 4: System Administration
Updating the MegaRAID Driver
4. Click Storage to expose the Syncro CS 9286-8e controller.
5. Right-click the Syncro CS 9286-8e controller and select Update Driver Software to start the Driver Update
wizard, as shown in the following figure.
Figure 35 Updating the Driver Software
6. Follow the instructions in the wizard.
4.4.2 Updating the MegaRAID Driver in Windows Server 2012
As a recommended best practice, always back up system data before updating the driver, and then perform a planned
failover. These steps are recommended because a driver update requires a system reboot.
1. Run Server Manager and select Local Server on the left panel.
2. Click the Tasks selection list on the right-hand side of the window, as shown in the following figure.
Syncro CS 92