User guide

LSI Corporation
- 28 -
Syncro CS 9286-8e Solution User Guide
March 2013
Chapter 3: Creating the Syncro CS 9286-8e Configuration
Creating Virtual Drives on the Controller Nodes
The Create Virtual Drive Summary window appears, as shown in the following figure.
Figure 22 Create Virtual Drive Summary
11. Click Finish to complete the VD creation process.
12. Click OK when the Create Virtual Drive - complete message appears.
3.3.3.1 Unsupported Drives
Drives that are used in the Syncro CS 9286-8e solution must selected from the list of approved drives listed on the LSI
web site (see the URL in 1.4, Hardware Compatibility). If the MegaRAID Storage Manager (MSM) utility finds a drive
that does not meet this requirement, it marks the drive as Unsupported, as shown in the following figure.
Figure 23 Unsupported Drive in MSM