User guide

LSI Corporation
- 27 -
Syncro CS 9286-8e Solution User Guide
March 2013
Chapter 3: Creating the Syncro CS 9286-8e Configuration
Creating Virtual Drives on the Controller Nodes
7. Select Always Write Back as the Write policy option, and select other VD settings as required.
8. Select the Provide Shared Access option, as shown in the following figure.
NOTE If you do not select Provide Shared Access, the VD is visible only from
the server node on which it is created. Leave this option unselected if
you are creating a boot volume for this cluster node.
Figure 21 Provide Shared Access Option
9. Click Create Virtual Drive to create the virtual drive with the settings you specified.
The new VD appears in the Drive groups window on the right of the window.
10. Click Next to continue.