User guide

LSI Corporation
- 19 -
Syncro CS 9286-8e Solution User Guide
March 2013
Chapter 3: Creating the Syncro CS 9286-8e Configuration
Creating Virtual Drives on the Controller Nodes
The first Configuration Wizard window appears.
4. Select Add Configuration and click Next.
5. On the next wizard screen, select Manual Configuration and click Next.
The Drive Group Definition window appears.
6. In the Drives panel on the left, select the first drive, then hold down the Ctrl key and select more drives for the
array, as shown in the following figure.
Figure 10 Selecting Drives
7. Click Add To Array, click ACCEPT, and click Next.
8. On the next screen, click Add to SPAN, then click Next.
9. On the next screen, click Update Size.