User`s guide
LSI Confidential
Characteristics of the LSI PCIe to SAS HBAs 3-13
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
Activity LED Header (J9) – The connector is a 4-pin, right angle, 0.1-
inch pitch, pin header for driving external activity LEDs.
Figure 3.6 SAS3444E and SAS3444EL Board Layout
• J1: PCI Express x8 lane board edge connector
• J2: SFF-8088 mini-SAS external right-angle connector
• J3, J6–J8: SATA internal latching right-angle connectors
• J9: 4-pin, right angle, 0.1-inch pitch, pin header for driving external
activity LEDs
3.1.6.3 Physical Characteristics
The SAS3444E and SAS3444EL boards are 6.6 inches x 2.713 inches.
PCI Express x8 connection is made through the edge connector J1. The
component height on the top and the bottom of the SAS3444E and
SAS3444EL boards follows the PCI Express specifications.
J9
J6
J3
J4
Standard PCI Bracket
SAS3444E
LSISAS1068E
Port 0
Port 1
Port 3 Port 2
Activity
LEDs
Link Not
LEDs
Present
J1
SFF-8088
Mini-SAS
Connector
(LPPCI)
Low-Profile
PCI Bracket
SAS3444EL
J2
Two Light Pipes,
One Green and
One Bi-color
J8
J7