User`s guide

LSI Confidential
Characteristics of the LSI PCIe to SAS HBAs 3-11
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
Activity LED Header (J6) – The connector is a 4-pin, right angle, 0.1-
inch pitch, pin header for driving external activity LEDs.
Figure 3.5 SAS3442E and SAS3442EL Board Layout
• J1: PCI Express x8 lane board edge connector
• J2: SFF-8470 SAS external right-angle connector
• J5: SFF-8484 SAS internal right-angle connector with four sideband
lines
• J6: 4-pin, right angle, 0.1-inch pitch, pin header for driving external
activity LEDs
3.1.5.3 Physical Characteristics
The SAS3442E and SAS3442EL boards are 6.6 inches x 2.713 inches.
PCI Express x8 connection is made through the edge connector J1. The
component height on the top and the bottom of the SAS3442E and
SAS3442EL boards follows the PCI Express specifications.
J1
J6
J2
J5
Standard PCI Bracket
(LPPCI)
Low-Profile
PCI Bracket
SAS3442E
SAS3442EL
Two Light Pipes,
One Green and
One Bi-color
LSISAS1068E
Link
Activity
LEDs
LEDs
Not Present