User`s guide

LSI Confidential
Characteristics of the LSI PCIe to SAS HBAs 3-3
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
Activity LED Header (J3) – The connector is a 4-pin, right angle, 0.1-
inch pitch, pin header for driving external activity LEDs.
Figure 3.1 SAS3041E and SAS3041EL Board Layout
• J1: PCI Express x4 lane board edge connector
• J2, J5–J7: SATA internal right-angle connectors
• J3: 4-pin, right angle, 0.1-inch pitch, pin header for driving external
activity LEDs
3.1.1.3 Physical Characteristics
The SAS3041E and SAS3041EL boards are 6.6 inches x 2.713 inches.
PCI Express x4 connection is made through the edge connector J1. The
component height on the top and the bottom of the SAS3041E and
SAS3041EL boards follows the PCI Express specifications.
J1
J3
J5 J6 J7
J2
J4
Standard PCI Bracket
(LPPCI)
Low-Profile
PCI Bracket
SAS3041E
SAS3041EL
Two Light Pipes,
One Green and
One Bi-color
LSISAS1064E
Activity LEDs
Link Not Present LEDs
Port 0
Port 1
Port 3 Port 2