User guide

LSI Corporation
- 18 -
LSI Nytro WarpDrive Application Acceleration Cards User Guide
June 2013
Chapter 3: Characteristics
LSI Nytro WarpDrive 6301 Card Physical Characteristics
3.3.1 Shipping
You must always ship the LSI Nytro WarpDrive 6301 card separately from its intended target servers. Do not ship a
server with the LSI Nytro WarpDrive 6301 card installed.
3.3.2 LEDs
Three board-mounted, right-angle LEDs shine through holes in the PCI bracket: one is for data activity, one is for drive
life, and one is for drive status. The LEDs are labeled on the bracket.
3.3.3 Troubleshooting the LSI Nytro WarpDrive Card
The LEDs provide key status information to diagnose any problem with the LSI Nytro WarpDrive card. You can also
contact Technical Support
. The following figure shows the LED layout.
Figure 9 LSI Nytro WarpDrive Card LED Diagram
Table 3 Status Indicators on a Running System
Name Color LED Description
Activity Green On, blinking – Indicates data activity on the card. No action required.
Life Green On, steady – Card has sufficient life remaining for programming and erasing the Flash memory. No
action required.
Yellow On, steady – Card has approximately 10% or less of life remaining for programming and erasing the Flash
memory. Plan for replacements.
Red On, steady – Card has no program or erase cycles left. Data can be read, but writes are at risk. Back up data and
copy to a new LSI Nytro WarpDrive card.
B
/LIH
6WDWXV
$FWLYLW\