User guide

LSI Corporation
- 17 -
LSI Nytro WarpDrive Application Acceleration Cards User Guide
June 2013
Chapter 3: Characteristics
LSI Nytro WarpDrive 6301 Card Physical Characteristics
If you experience a problem with your LSI Nytro WarpDrive 6203 card that you cannot resolve, report it to your FAE or,
if you obtained the product from an OEM, report it to the OEM. Keep these tips in mind when reporting a problem:
 Clearly identify and report the revision level of the LSI Nytro WarpDrive 6203 card. To view this information, use
the ddcli command, Option 1.
 Report the part number (for example, L3-25475-xxx) listed on the label, and clearly identify the board revision.
 Describe the steps leading up to the error.
 Report the operating system version and the host driver version.
3.3 LSI Nytro WarpDrive 6301 Card Physical Characteristics
The LSI Nytro WarpDrive 6301 card uses a full-height PCIe board.
The LSI Nytro WarpDrive 6301card uses a SAS2308 controller with drive firmware that runs on its internal processor. The
controller connects to up to eight embedded nonvolatile memory modules. The LSI Nytro WarpDrive 6301 card can be
used for either persistent or nonpersistent data and offers high-performance with low latency and a low CPU burden.
The following figure shows the LSI Nytro WarpDrive 6301 card.
Figure 8 LSI Nytro WarpDrive 6301 Card