User guide

LSI Corporation
- 13 -
LSI Nytro WarpDrive Application Acceleration Cards User Guide
June 2013
Chapter 2: Installation
Managing the LSI Nytro WarpDrive Card
3. To toggle between the Boot Support settings, use the -/+/ Enter keys.
Figure 5 The Disabled Boot Support Setting
4. Press Esc to exit the BIOS menu.
2.4 Managing the LSI Nytro WarpDrive Card
You can use the following tools to manage your LSI Nytro WarpDrive card:
BIOS This tool is available only during boot. Use this tool to view information about the card and to configure the
boot support options. See BIOS Boot Support Settings.
DDCLI This menu-driven, command line interface tool permits you to view information, view the status, and flash
upgrade the firmware for the LSI Nytro WarpDrive card. Refer to the LSI® Nytro™ WarpDrive® Application Acceleration
Card Management Utility User Guide.
MegaRAID Storage Manager This GUI tool permits you to manage LSI MegaRAID controllers, but you can also use the
MegaRAID Storage Manager™ tool to view LSI Nytro WarpDrive card information. Refer to the LSI® Nytro™ MegaRAID®
Application Acceleration Card Software User Guide.