Logic MegaRAID SCSI 320-1 RAID Controller User's Guide

xvi Contents
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
6.2.4 Step 4: Set Termination 6-6
6.2.5 Step 5: Install MegaRAID SCSI 320-1 6-12
6.2.6 Step 6: Connect SCSI Devices 6-13
6.2.7 Step 7: Set Target IDs 6-14
6.2.8 Step 8: Power Up 6-16
6.2.9 Step 9: Run the MegaRAID BIOS Configuration
Utility 6-17
6.2.10 Step 10: Install the Operating System Driver 6-17
6.3 Summary 6-18
Chapter 7
Troubleshooting
7.1 General Troubleshooting 7-1
7.2 BIOS Boot Error Messages 7-3
7.3 Other BIOS Error Messages 7-4
7.4 Other Potential Problems 7-5
Appendix A
SCSI Cables and Connectors
A.1 68-Pin High-Density SCSI Internal Connector A-1
A.1.1 Cable Assembly for Internal Wide SCSI Devices A-2
A.1.2 Connecting Internal and External Wide Devices A-3
A.1.3 Converting Internal Wide to Internal Non-Wide
(Type 2) A-4
A.1.4 Converting Internal Wide to Internal Non-Wide
(Type 30) A-5
A.1.5 Converting from Internal Wide to Internal Non-Wide
(Type 3) A-5
A.2 SCSI Cable and Connector Vendors A-6
A.3 High-Density 68-Pin Connector Pinout for SE SCSI A-7
A.4 68-Pin Connector Pinout for LVD SCSI A-9
Appendix B
Audible Warnings
Appendix C
Glossary