Logic MegaRAID SCSI 320-1 RAID Controller User's Guide

MegaRAID SCSI 320-1 Hardware Guide IX-1
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Index
Numerics
160M and Wide SCSI 4-1
68-pin connector pinout for LVD SCSI
A-9
68-Pin High Density Connectors
A-1
A
AMPLIMITE .050 Series connectors A-8
Array
C-1
Array Configuration Planner
5-14
Array management software
C-1
Array performance features
4-3
Array spanning
C-1
Assigning RAID levels
5-11
Asynchronous operations
C-1
Audible Warnings
B-1
Automatic failed drive detection and rebuild
4-4
B
BIOS 4-6
BIOS Boot Error Messages
7-3
BIOS Configuration Utility
6-17
BIOS message
6-16
Bus data transfer rate
4-6
Bus type
4-6
Bus-based
2-11
C
Cable assembly for internal Wide SCSI devices A-2
Cables To Go
A-6
Cache configuration
4-6
Cache I/O
C-1
Cache Memory
4-7
Card size
4-6
Channel
C-2
Cold swap
C-2
Compatibility
4-10
Configuration on Disk
4-2
Configuration Strategies
5-9
Configuring Arrays
5-8
Configuring Logical Drives
5-12
Configuring SCSI physical drives
5-1
Connecting internal and external Wide devices
A-3
Consistency check
2-4, C-2
Converting from internal Wide to internal non-Wide (Type 3)
A-5
Converting internal Wide to internal non-Wide
A-4
Converting internal Wide to internal non-Wide (Type 30)
A-5
CPU
4-7
Creating hot spares
5-8
Creating logical drives
5-9
D
Data redundancy
Using mirroring
2-6
Data transfer capacity
C-2
Dedicated parity
2-8
Degraded
2-10, C-2
Devices per SCSI channel
4-6
Disconnect/reconnect
4-9
Disk
C-2
Disk array
C-2
Disk Array Types
2-11
Disk duplexing
C-2
Disk mirroring
2-6, C-2
Disk rebuild
2-9
Disk spanning
2-7, C-2
Disk striping
2-4, C-2
Disk subsystem
C-3
Documentation
1-4
DOS
4-5
Double buffering
C-3
Drive roaming
4-2
Drivers
6-17
E
Enclosure management 2-11
F
Fail 2-10
Failed
2-10
Failed drive
C-3
Fast SCSI
C-3
Fault tolerance
2-4
Fault tolerance features
4-4
Features
1-2, 4-1
Firmware
4-6, C-3
Flash ROM
1-2
FlexRAID Power Fail option
C-3
Format
C-3
G
GB C-3
Glossary
C-1
GWC
A-6