User`s guide

2-10 MegaRAID SAS Hardware Installation
Copyright © 2009 by LSI Corporation. All rights reserved.
JT6 is for SAS ports 3-0 and JT7 is for SAS ports 7-4.
Step 2. Plug the HDD connector on the other end of the internal cable
into the connector on the SAS drive or the SATA II drive.
Step 3. If you have another drive, connect it to another plug on the
internal cable.
You can connect other devices if the cable has more
connectors.
Figure 2.5 Connecting the SAS 9260-8i RAID Controller to a Drive
2.5.2 Connecting the SAS RAID Controller with External Connectors to
a Drive Enclosure
This subsection provides step-by-step instructions for connecting the
MegaRAID SAS 9280-8e RAID controller to a drive enclosure containing
SAS drives, SATA II drives, or a combination of both drive types.
HDD
Connector
Power
Connector
85039-06