Installation guide

Controller Object Commands
www.lsi.com/channel/products 37
Queue Xfer Resp
Port Status Unit Depth IOPs Rate(MB/s) Time(ms)
--------------------------------------------------------------
p0 NOT-PRESENT - - - - -
p1 NOT-PRESENT - - - - -
p2 OK - - - - -
p3 OK u0 10 93 2.907 85
p4 OK u1 10 84 2.640 95
p5 OK - - - - -
p6 NOT-PRESENT - - - - -
p7 NOT-PRESENT - - - - -
Example of running average (ra) drive statistics:
To view a summary of the running average data for the set of drives attached
to the controller, use command
/cx show dpmstat type=ra.
Notice that in this case, the Performance Monitor is turned off.
//localhost> /c0 show dpmstat type=ra
Drive Performance Monitor Configuration for /c0 ...
Performance Monitor: OFF
Version: 1
Max commands for averaging: 100
Max latency commands to save: 10
Requested data: Running Average Drive Statistics
Queue Xfer Resp
Port Status Unit Depth IOPs Rate(MB/s) Time(ms)
------------------------------------------------------------------------
p0 NOT-PRESENT - - - - -
p1 NOT-PRESENT - - - - -
p2 OK - - - - -
p3 OK u0 0 435 25.249 2
p4 OK u1 0 366 21.630 3
p5 OK - - - - -
p6 NOT-PRESENT - - - - -
p7 NOT-PRESENT - - - - -
Example of extended drive statistics (ext):
To view a summary of the extended drive statistics associated with the
specified controller, use command
/cx show dpmstat type=ext.
//localhost> /c3 show dpmstat type=ext
Extended Drive Statistics for /c3 ...
Sectors Commands
---------------------------------- ---------------------------------------
Port Read Write Write-FUA Read Write Write-FUA Flush
---------------------------------------------------------------------------
p0 28704384 0 28704384 28704448 0 0 0
p2 28704384 28704448 0 0 0 0 0
p3 28704704 0 0 0 0 0 0