Installation guide

Controller Object Commands
www.lsi.com/channel/products 31
/cx show rebuildmode
/cx show rebuildrate
/cx show verify
/cx show verifymode
/cx show verifyrate
/cx show selftest
/cx show phy (9750 and 9690SA only)
/cx add type=<RaidType>
(RaidType={raid0,raid1,raid5,raid6,raid10,raid50,single,
spare}) disk=<p:-p..> [stripe=<Stripe>][noscan][nocache|
nowrcache][nordcache|rdcachebasic]
[group=<3|4|5|6|7|8|9|10|11|12|13|14|15|16>]
[autoverify][noqpolicy][ignorECC][name=string](
[v0=n|vol=a:b:c:d](n=size of first volume in GB)
[rapidrecovery=all|rebuild|disable]
[storsave=<protect|balance|perform>]
/cx add rebuild=ddd:hh:duration
/cx add verify=ddd:hh:duration
/cx add selftest=ddd:hh
/cx del rebuild=slot_id
/cx del verify=slot_id
/cx del selftest=slot_id
/cx set dpmstat=on|off
/cx set spinup=nn
/cx set stagger=nn
/cx set autocarve=on|off
/cx set carvesize=[1024...32768]
/cx set rebuild=enable|disable|1..5
/cx set rebuildmode=<adaptive|lowlatency>
/cx set rebuildrate=<1..5>
/cx set autorebuild=on|off
/cx set autodetect=on|off disk=<p:-p>|all
/cx set verify=enable|disable|1..5
/cx set verify=advanced|basic|1..5
/cx set verifymode=<adaptive|lowlatency>
/cx
set verifyrate=<1..5>
/cx set verify=basic [pref=ddd:hh]
/cx set selftest=enable|disable
/cx flush
/cx update fw=filename_with_path [force]
/cx commit (Windows only. Also known as shutdown)
/cx rescan [noscan]