User's Manual

 Login BodycamTool
1. Double click the icon to run the sofeware after your device connect to your PC,
click “Detect” button to read the product ID，when the “Status” box shows “InitDev
Device Success!”, which means that BodycamTool connects device successfully, input the
password 888888；click “Login” button, the “Status” box shows Login Device Success! See
the picture as below：
2. In the first part we can see the “Enable USB D isk” button that means device’s memory
can be read by PC, “Time Sync” means that device’s time can synchronize to your PC.
Note those three setting “Reset to Default”/“Format Disk”/“Newpassword”, Once the
factory settings are restored, the current settings saved will be restored to the factory
default settings. Format SD indicates that the data inside the dev ice will be erased
completely. Device default password is 888888, if you want to modify the password,
Please make it more easy to remember.
3. In the second part user can set “Area”/ “Country”/ “City” according to your current
location, after that the time zone will change automatically. “APN” means that device
support dedicated card provided by telecommunication operators, the “APN User” and
“APN” is also provided by operators.
4. The third part inc lude dev ice information and wifi, click “Get” button to read the default
information, you can click “Set” to modify these information after you input a new
one(the “Device NO.” can NOT be changed)。Input “WifiSSID” and “Wifi password”, then
click “Add” button to add the wifi to device and then click “Get” to check if the wifi was
adding successfully.
5. The forth part is server config, Select the “ServerName” to “CMSV6” and c lick “Get”
button to get the defalut server setting, modify the server IP in “IP” box and then click