User's Manual

Operation for BodycamTool
 Install the BodycamTool
Support Windows2000/WindowsXP/Vista/Windows7/Windows8 and Windows10, if it’s your
device first time to connect your PC, you need to install the BodycamTool software to make
your PC communicate with our device.
1.1 Hold the “PTT” button to connect device to your PC’s USB port with USB cable, then your
PC will generate a “CD driver”, see the picture: , and then find the
software ”BodycamTool.exe” in the “CD driver”.
1.2 Double click the BodycamTool.exe to set up the software, and click the “finish” button to
finish the installation.
And then it will continue to install the USB driver, see the picture as below:
Click “next” button to go on the driver’s installation, then the driver install successfully, click
“Finish” to end the installation, see the picture as below.