User's Manual
NEOVIA
40LCD TV OWNERS INSTRUCTION
21
ENGLISH
OSD CONTROL
PICTURE
Press the MENU button.
Press left cursor to select “PICTURE”.
Press down cursor to select functions within
“PICTURE” menu.
Press right / left cursor to change the settings.
Press MENU or ENTER to save.
Press MENU to escape OSD ACCESS
PICTURE.
Adjust the chosen function.
Press ENTER to save.
Press EXIT to turn the OSD Off.
This is the general picture layout which can
be seen when selecting “PICTURE” in the
on screen display (OSD).
The Picture quality settings can be made in this menu. From changing simple brightness to the color
temperature to reproduce the pictures as what user wants. Any changes can effect the display of the picture on
the screen.
MODE : There are four presets and a setting for the user. The presets are MOVIE , SOFT, SHARP, NORMAL
and USER.
BRIGHTNESS : More properly called BLACK LEVEL. It adds or subtracts an offset, or bias, into the red,
green, and blue signals. This control should be adjusted to suite the needs of the customer.
CONTRAST : It applies a scale factor (gain) to the red, green, and blue signals . It affects the luminance
(proportional to intensity) that is reproduced for a full white input signal. The control should be adjusted
to suit the needs of the customer.
PHASE/FREQUENCY : It applies the resolution and position of the screen to suit the needs of customer in
analog RGB mode.
SHARPNESS : It applies to richness of detail of the picture. Control the sharpness if need to suite the needs of
the customer.
COLOR : To change the level of color from saturation to black and white .
TINT : To change the level of the HUE
COLOR TEMPERATURE :It applies to level of brightness. By increasing the level causes the overall picture to
be slightly bluish in color. By decreasing the level causes picture to be slightly redish in color.
BACKLIHGT : This changes the level of brightness of the back light of the display