User's Manual

40LCD TV OWNERS INSTRUCTION
16
NEOVIA
ENGLISH
ADD / DEL
To Add and/or
Del channels in the
program table
If in another
source, press TV
to select TV
LAST
To return to
previous channel.
Cursors
To move to desired
position
This is the general TV setting which is
shown when selecting “TV” in the on screen
display (OSD).
When turning on for the first time, the TV should be set in order to receive reception.
For NTSC the channels are preset to all the channels from channel 2 to channel 99.
For other areas the channels (SECAM / PAL), needs to be searched before TV is tunned to areal reception.
For tunning for the first time.
1. First, country needs to be selected before auto searching is enabled. This is also need to be set first in order to
set the tuner according to each countries standards.
2. Once the country has been set then auto search can begin.
3. Move the cursor to auto search channels and begin auto searching.
4. LCD TV then will start searching for all the available channels.
5. Once all the channels have been searched these are stored in the program table.
6. All the channels can be fine tuned.
7. All the channel names can be edited to suit individuals who likes to change the labels for their purposes.
8. Once all the setting has been completed press enter to save and press exit to leave the OSD.