NEOVIA 40 LCD TV OWNER S INSTRUCTION Connecting to PC ENGLISH Analog RGB PC AUDIO in DVI Connect the cables as shown above and make sure that both PC and the LCD TV is turned off for precautions. Please note that especially DVI cables should be connected when the power has been turned off.
40 LCD TV OWNER S INSTRUCTION NEOVIA SETTING TV SETTING This is the general TV Setting which is shown when selecting “TV” in the on screen display (OSD). AUTO SETTING COUNTRY : Attuned the TV for that particular country, for correct searching of the channels. AUTO SEARCH : When press “Right” in the remote or “VOL Right” button in the front of the TV, the TV automatically searches all the available channels that can be displayed. PROGRAM TABLE : Lists all the available channels that has been searched.
NEOVIA 40 LCD TV OWNER S INSTRUCTION ENGLISH ADD / DEL To Add and/or Del channels in the program table If in another source, press TV to select TV LAST To return to previous channel. Cursors To move to desired position This is the general TV setting which is shown when selecting “TV” in the on screen display (OSD). When turning on for the first time, the TV should be set in order to receive reception. For NTSC the channels are preset to all the channels from channel 2 to channel 99.
0 LCD TV OWNER S INSTRUCTION NEOVIA SOURCE SETTING This is the general “SOURCE” layout which can be seen when selecting “SOURCE” in the on screen display (OSD). LAYOUT Selecting various display out modes Single Main Picture Picture in Picture(PIP) Picture By Picture(PBP) separate Picture (POP3) Main Picture with 5 small Picture (POP5). Main Picture with 3 small WINDOW LAYOUT (DEFINITION) This LCD TV has capable of showing multiple pictures in one display screen.
NEOVIA 40 LCD TV OWNER S INSTRUCTION ENGLISH POP5:(Picture On Picture) Here main screen with five small picture from one source LAY OUT (Hot Key) Position(Hot Key) To change the position of the secondary picture in PIP Once the multi display has been chosen, main window source and secondary window source need to be selected. Resize(Hot Key) To change the size of secondary picture Once the layout is changed user has to set two sources to display for all case other then the main screen.
40 LCD TV OWNER S INSTRUCTION NEOVIA SOURCE SELECTION Cursor Use it to select the desired source. This screen is displayed when “SOURCE” button is pressed. The display above is shown when the “SOURCE” button has been pressed by either remote control or “SOURCE” button from the OSD. The source selection displays all the inputs that it can be displayed, if connected. Use the up / down cursor to move the cursor to desired source and press enter to select the source.
NEOVIA 40 LCD TV OWNER S INSTRUCTION ENGLISH PC RESOLUTION The list below shows the resolutions that are currently supported by LCD TV. If the signals from PC differes from the list below then screen might be out of size or may not show at all. Please check to set your video card correctly and make sure that your video driver is the latest. Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) MAC MAC 640 X 480 1024 X 768 35.00 60.
40 LCD TV OWNER S INSTRUCTION NEOVIA OSD CONTROL Press the MENU button. Press left cursor to select “PICTURE”. Press down cursor to select functions within “PICTURE” menu. Press right / left cursor to change the settings. Press MENU or ENTER to save. Press MENU to escape OSD ACCESS PICTURE. Adjust the chosen function. Press ENTER to save. Press EXIT to turn the OSD Off. This is the general picture layout which can be seen when selecting “PICTURE” in the on screen display (OSD).
