User's Manual
40LCD TV OWNERS INSTRUCTION
26
NEOVIA
ENGLISH
Duplicated pictures on the
screen.
This may be caused by reflected
broadcasting signals when there is are
mountains, buildings, or trees near your
house.
Check if there are any tall objects such as skys
crapers near your house.
Check that the direction of the antenna is
adjusted correctly.
Blurred or snowy picture. The direction of the antenna is not optimal.
The antenna cable is disconnected.
Check that the direction of the antenna is
correct.
Check that the antenna cable is connected to
the ANTENNA jack on the back of the LCD
TV.
A “No input signal”
message appears.
The Signal connection is incorrect. Check that the computer is turned on.
Check the display cable connectivity.
Check the supported input signal
specifications.
The input signal is not supported by the
LCD TV.
Check the supported input signal
specifications.
Check the display cable specifications.
The entire screen flickers. This product has been optimally set to watch
TV channels in the factory. There may be
flickering when you watch still images from a
PC. This is not a problem of the product.
Symptom Possible Problem Possible Solution
The remote control does not work properly!
Are the polarities of the installed batteries correct?
Has the battery discharged completely?
Is the power cord plugged in properly or is there a power failure?
Is fluorescent lighting or a neon sign near the unit?
Warning
If a problem has been detected, unplug the power cable from the wall outlet first.
Using the product when it has a fault may cause electric shocks or fire.
Do not place objects near the wall outlet so that you can unplug the power cable if necessary.