Technical Specifications

SHOP-FABRICATED STRUCTURAL WOOD 06 17 00

LP - Building Products

SPEC-DATA

and MANU-SPEC

are registered trademarks of Reed Elsevier Inc. The three part MANU-SPEC format conforms to the editorial style of the Construction

d. Impose no loads other than the weight of the erectors on the structure before it is permanently sheathed.

e. Exercise caution when removing temporary bracing to apply sheathing.

f. After sheathing, do not exceed design loads on members with construction materials.

g. All conditions calling for notched or drilled beams must be reviewed and approved by a licensed professional

engineer.

D. [______].

3.05 CLEANING

A. Perform cleanup in accordance with Section [01 74 00 - Cleaning and Waste Management] and Section [01 74 13 -

Progress Cleaning].

B. Upon completion, remove surplus materials, rubbish, tools and equipment.

Specifier Note: Specify special measures needed to minimize waste, collect recyclable waste and dispose of or recycle field-generated

construction waste created during demolition, construction or final cleaning.

C. Waste Management:

1. Coordinate recycling of waste materials with Section [01 74 00 - Cleaning and Waste Management] and

Section [01 74 19 - Construction Waste Management and Disposal].

2. Collect recyclable waste and dispose of or recycle field-generated construction waste created during demolition,

construction or final cleaning.

3. Remove recycling containers and bins from site.

4. [______].

3.06 PROTECTION

Specifier Note: Coordinate the following Article with Section 01 76 00 - Protecting Installed Construction.

A. Protect installed product from damage during and after construction in accordance with Section [01 76 00 - Protecting

Installed Construction] [______].

B. Repair damage to adjacent materials caused by laminated strand lumber installation.

C. [______].

END OF SECTION