Installation Guide

TRIM & FASCIA 190, 440, 540 & 2000 SERIES

INSTALLATION

Framing Diagram:

Sot 12 inches Wide

and Less

• Install 2x framing on wall to

fasten perimeter of the sot

• Install intermediate framing to support

and fasten sot seams

Framing Diagram:

Sot Greater than

12 inches Wide

• 24” o.c. intermediate framing

is required

• Install 2x intermediate framing a max.

of every 24” o.c. to fasten sot at seams

Nailing Diagram:

Sot 12 inches Wide

and Less

• Fasten every 6” o.c.

along perimeter

• Fasten along seams a max. of every 6” o.c.

Space butt joints 3/16” and caulk*

Nailing Diagram:

Sot Greater than

12 inches Wide

• Fasten every 6” o.c.

along perimeter

• Fasten a max. of every 12” o.c.

along intermediate framing

*If joint moulding option is selcted, add the thickness of the web to the gap allowing a net 3/16” space for expansion.

LP SmartSide Sot

• Install 2x framing on wall to

fasten perimeter of the sot

• Fasten along seams a max. of every 6” o.c.

Space butt joints 3/16” and caulk*

• 24” o.c. intermediate framing

is NOT required