VINTAGE TURNTABLE Model: LPSC-010
User Manual Splendid real time BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source. 2. Avoid locations subject to vibrations, excessive dust, cold or moisture. 3. Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted accidentally contact your dealer. 4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean, dry cloth is recommended for cleaning. 5.
cartridge. The tone arm can be raised and lowered by hand, or by using the lift lever. Please note that the tone arm needs to be moved away from resting position (on the arm clip) for the turntable motor to activate if auto stop is activated 3. Lift lever 4. 33 / 45/78 RPM switch – This switch controls the RPM of the turntable platter. 5. AUTO STOP ON/OFF switch 6. Ceramic cartridge 7. Platter – Place your record here. Please use the 45 RPM adapter, if the spindle is the 8. Spindle 9.
LPSC-010. After pairing and connection, the BT indicator will become blue without flashing, you can enjoy the Bluetooth playback. Turn the VOLUME CONTROL KNOB to adjust the volume. (The mobile phone or tablet PC’s volume control may also impact on Volume Level so ensure this is also turned up). Remark: During the Bluetooth mode, please make sure that the LINE IN jack was not plugged in with the audio cable.
Installing the Stylus 1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”. 2. Push the stylus upward as in direction "C" until the stylus locks into the tip position. TIPS TO BETTER TURNTABLE PERFORMANCE 1. When opening or closing the turntable cover, handle it gently, gripping it either at the centre or at each side. 2. Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable platter or record edge. 3.
