Eye Massager User Manual
Attention Please read and comprehend all the contents of this manual and operate the product according to the instructions. 1. DO NOT use if you have had an eye operation, or if you have any eye disease such as glaucoma, cataract, and amotio retinae; 2. DO NOT clean the product with water; clean it with cotton soaked in alcohol; 3. This product has a hot surface; people sensitive to heat should take extra care when using this; 4.
Product structure Change Mode / Power ON/OFF Music Indicator Light Air Pressure Indicator Light Heat Compression Indicator Light Vibration Massage Indicator Light Technical parameters Product name: LOYPA Eye Massager Input: 5V 1A Rated power: 4.
Wearing the device Align the cloth cover to your eyes, put on the device, adjust the elastic band, adjust the device to the most comfortable position. Hold the power button for 3 seconds to turn on the eye massage. Charging 1. Plug the power adapter into the USB port. 2. The indicator light is red during charging, and it will be in blue once the battery has been charged completely. 3. The product cannot be used during charging.
During operation Default setting: Automatic mode = air pressure + heat compression + vibration + music The default time of usage is 15 minutes after turning on the product. For longer time of usage, please turn on the product again. Press power button to change mode: Gently press power button to change modes.
FAQ and Troubleshooting Problem There is a sound mechanical or air sound coming from device automatically. Device does not turn on. Buttons are not responsive. Air pressure is weak. Possible causes Normal sound of motor working, or air pressure Battery is low Actions No need to do anything Charge the device us at support@loypa.net. LOYPA is not responsible for any damage or injuries that occur if you attempt to disassemble or repair the product yourself. Maintenance 1. Use wet wipe to clean it.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
