Installation Guide
3
Instructions
Controller
Network access settings
Button
1. Power on the socket, make sure that the phone is connected to the Wi-Fi network in the 2.4GHz band, and turn on the
phone’s Bluetooth.
2. Ensure that the device, mobile phone, and router are close to each other.
3. Download and open the App: search for "Smart Life" in the App Store or scan the QR code on the outer packaging/manual to
download and install the App. For the rst download and use, please click the "Create a new account" button to register. If you
already have an account, click the "Log in with an existing account" button.
1. Open the "My Home" page of the Smart Life App, and click the add button "+" in the upper right corner of
the page.
2. Select the "Manual Add" mode, select "Lighting" from the list page on the left, and then select "Light strip
(Bluetooth + Wi-Fi)", conrm that the device is in the "fast ashing" state. Enter Wi-Fi password to enter the
automatic network conguration mode program; or select the "auto discovery" mode to quickly discover the
device, make sure that the Bluetooth function has been turned on.
Instructions for the use of the controller button.
1. Single click: turn on the light + scene modes cycle switching.
2. Double click: turn off the light.
3. Long press: Long press for 5 seconds to reset the network conguration.