User Guide

2. Click the

ZOOM OUT or the Z-OUT button to shrink the map toward the cen-

ter.

Zoom Range Window

The current zoom range shows in the Zoom Range Window next to the

Z-In button (see previous figure). The Zoom Range Window is the third

common zoom tool. You can use this window in at least two ways:

1. Click the down arrow at the right of the box, and click on a preset

range.

2. Click inside the box, type the desired range number and press

ENTER.

At left, Chicago is centered on the map with a range of 3000 miles; the

figure on the right shows a zoom range of 200 miles. (These figures

show only the center portion of the Master Map.)

NOTE:

You can always use the Zoom-In or Zoom-Out buttons, no matter

what other commands may be activated.

Creating Rectangle Map Borders

Making a Map Border is the first step in creating a map for your

Lowrance or Eagle GPS unit. Here's how: (Refer as needed to the Tool-

bar section on page 43.)

1. Center the Master Map display on the area you want to include in

your map. Click the

CENTER MAP button , and then click the

cross-hair mouse pointer

on the area you want centered.

2. If needed, click the

ZOOM IN or ZOOM OUT buttons

so you can see the entire area that you want to draw a map border around.

3. Click the

DRAW MAP BORDERS button , and your mouse

pointer becomes a pencil

4. Move the mouse pointer above and to the left of the desired area.