User Guide

50
The route name can be edited in the window. To change the name:
1. Click on the name to highlight it.
2. Pause a moment; then click the name again (This is not a regular double-click.).
3. Type a new name and press ENTER.
The waypoints in a route can be edited. Double-click the route name and
you'll open the Route Waypoint List Window, which we describe next.
Route List Window
Route Waypoint List Window
(This is not shown when the program starts for the first time; a route
must be created first. With the Route List window open, double-click on
the route name to open the Route Waypoint List window.) This window
shows the waypoints that make up a route on the Master Map, in a text
list format. The symbol, name, leg length and position (in latitude and
longitude) are listed. The symbol, name, latitude and longitude can all
be edited either on the Master Map or in the list window. You can also
insert and delete waypoints in a route. To edit, right-click the way-
point. To relocate a route waypoint on the Master Map by dragging:
1. Right-click on the waypoint and select
MOVE WAYPOINT.
2. Move the mouse pointer with the waypoint to the new location.
3. Left-click to drop the waypoint in the new spot.
You can click
Esc at anytime, while moving dragging the waypoint, to
cancel the move. The waypoint remains where it was.
For more information on this function, see Edit Route Waypoint in the
Help file's Command Reference.