Spec Sheet

VERIFACT MODEL K MICROPHONE
WITH SHOCK MOUNT ASSEMBLY
MODEL K MICROPHONE
MOUNTING SHOE
MOUNTING PLATE
NYLON WASHER
LOCK NUT
SHOCK ABSORBERS
(Screws provided)
(6-32 x ¾)
IMPORTANT: Make certain that wires are
attached to microphone’s
terminal strip BEFORE
installing microphone to shock
mount assembly.
page 2 of 2
LOUROE ELECTRONICS 6955 VALJEAN AVE., VAN NUYS, CA 91406 TEL [phone] FAX [phone]
Website: www.louroe.com Email: [e-mail]
K MIC CS(pdf)n 3/07
NOTE:
Shock mounting is recommended only when
microphone is to be installed in a transportation
vehicle.