Data Sheet

NOTE: If using a Louroe Speaker/Microphone, the
two speaker wires bypass the LA-1000 and
connect directly to the base station.
page 2 of 2
LOUROE
BASE STATION
OR AUDIO INTERFACE
ADAPTER
LA-1000
Line Amplifier
AA
12 Vdc12 Vdc
BB
CC
MIC OUTMIC OUT
This wire
not used
This wire
not used
Terminal “A”
not used
Terminal “A”
not used
BB CC
MIC INMIC IN
AA
BB
CC
12 Vdc
SUPPLY
INTERCONNECTION DIAGRAM
LA-1000
LOUR OELOUROE
EL EC TRO NI CSEL EC TRO NI CS
LINE AMPLIFIE R
LOUROE ELECTRONICS, 6955 VALJEAN AVE., VAN NUYS, CA 91406 [phone] FAX [phone]
www.louroe.com / [e-mail]
A = 12Vdc (red)
B = Audio Output (black)
C = Ground (bare)
BAREBARE
A B C
BACK S I D E O F
VERI FACT A
MICR O P H O N E
L
N
BLACKBLACK
REDRED
All Louroe Microphones are
compatible with the LA-1000 Line
Amplifier. Verifact “A”
Microphone used as an example.
INSTALLATION AND OPERATING INSTRUCTIONS
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE: Unshielded cable is not
satisfactory for audio systems
WIRING REQUIREMENTS
West Penn 452 or equivalent
LA-1000 1/08