Manual

PAGE 17 of 28
POWER CONNECTIONS:
Plug the DG-12 power supply unit to the 3-pin right angle closed Power Header[29]
marked “15 Vdc” located at the rear of the DG-12II unit. Push firmly and make sure that
the locking tables hold the plug-in connector in place. Plug the power supply to a 110 Vac
outlet. Plug the DG-MA AC cord to a 110 Vac outlet
II
Fig. 12 Connecting power supply to DG-12II
PUSH IN
&
RELEASE
Black
Green
White
to power source
LOUROE ELECTRONICS 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL [phone] FAX [phone]
Website: www.louroe.com Email: [e-mail]
(818)
INSTALLATION AND OPERATING INSTRUCTIONS
DG-12II 2/08