User manual

SPEED CONTROL FOR DIALS AND SCROLLS

Loupedeck offers you separated speed control for adjustment dials and (HSL) scrolls. You can

access the speed control from configuration software by clicking Deck Settings from the lower

right corner.

Speed control has two modes: Accuracy-mode and speed-mode. In accuracy-mode, Loupedeck

prioritizes very accurate adjusting over speed. Speed-mode is the opposite; speed is prioritized

over accuracy.

You can set your Loupedeck to use either mode or both modes simultaneously, which is

controlled by the turning speed of dials and scrolls. You can also adjust how fast the speed-mode

is (it can be 1-5x faster than the accuracy-mode).

• Sensitivity

If set to slow: Loupedeck will stay in accuracy-mode, speed-mode is not possible.

For enabling speed-mode, Sensitivity must be set to the second step of the sensitivity slider.

If set to fast: Loupedeck will enter speed-mode immediately.

For accuracy-mode, turning speed has to be very slow.

• Speed

If set to slow: Speed-mode will have the same speed as accuracy-mode.

If set to fast: Speed-mode is very fast and minor turning will have a big change in values.

• Double speed

When set on values will change twice as fast. When enabling double speed you will see hue-

light flashing a couple of times.

UPDATING LOUPEDECK

Visit the Loupedeck website www.loupedeck.com for software and configuration software

updates.