User's Manual

rejected (and all combinations that are not in the list are accepted). Any
detections with the specified Channel plus ID combination in the list are not
recorded by the receiver or displayed (on the LCD or by the SRX Host).
Add a Channel plus ID combination to the reject list via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 2)Set Reject Ch/ID >1)Add
Enter the channel followed by the ID. The display automatically inserts a slash
[/] between the two values as they are entered. The number in brackets in the
first line of the display corresponds to the entries in the list (e.g. entry #33 in the
reject list).
Any entry in the reject list can also be viewed and deleted. View an entry via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 2)Set Reject Ch/ID > 2)View/Del
The first entry is shown in the first line of the display. To view the next entry, use
the Right Arrow key to advance through the list. An entry in the list can be
deleted at any time by pressing the 1 key (1)Del).
AC C E P T I N G CH AN N E L P L U S ID
Use this feature to create a list of Channel plus ID combinations that should be
accepted during a scan. All Channel plus ID combinations added to this list are
accepted (and all combinations that are not in the list are rejected). Any
detections with the specified Channel plus ID combination in the list are
recorded by the receiver and displayed (on the LCD or in the SRX Host).
Add a Channel plus ID combination to the accept list via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 3)Set Accept Ch/ID >1)Add
Enter the channel followed by the ID. The display automatically inserts a slash
[/] between the two values as they are entered. The number in brackets in the
first line of the display corresponds to the entries in the list (e.g. entry #33 in the
accept list).
Any entry in the accept list can also be viewed and deleted. View an entry via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 3)Set Accept Ch/ID > 2)View/Del